Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
The POWER indicator on the main unit lights up. 2 Press INPUT to switch the function from AUDIO IN to the iPod. Press INPUT, and confirm indicator off. 3 Select songs and start play on your iPod (refer to “Compatible iPod/iPhone models”). The system charges the battery of iPod at the same time. Use the remote or your iPod to play, stop and perform other operations. When operating the iPod while it is in the connector, brace it with your other hand. 4 Adjust the volume using Volume +/– on the main unit. 9GB Using the remote Using the remote The default settings are underlined. 1 INPUT button Switches the input source. iPod y AUDIO IN* (The INPUT indicator lights up) 2 M/m** button Select a menu or a track for playback. ./>** buttons Hold down to fast-rewind (fast-forward), or press and release to skip to the beginning of the current (or next) song. MENU** button Works much like the Menu button on the iPod. ENTER** button Execute the selected menu or the playback. NX button** Hold down to turn the iPod off, or press and release to play back or pause. 3 SHUFFLE button Play tracks in random order. (Track t album t OFF) 4 BASS BOOST button Adjust the bass. ON y OFF (The BASS BOOST indicator lights up) 5 1 (POWER) button To power ON/Standby. ON y Standby (The POWER indicator lights up) 6 REPEAT button Play tracks repeatedly. (Track t All tracks t OFF) 7 VOLUME +/– button Adjusts the volume. (32 levels) (While adjusting the volume, the POWER indicator blinks. When the volume level is minimum or maximum, the MUTING indicator blinks.) 8 MUTING button Silent the sound ON y OFF (The MUTING indicator lights up) 10GB * * . ** See the user’s guide of your iPod for information on the operation of the button. Notes • Depending on the connected iPod, operations may differ. • The iPhone rings as the ring volume set on the iPhone even when it is connected to the unit. Adjust the ring volume to the appropriate setting on the iPhone. • When the iPhone is connected to the unit and you receive a call during playback, playback will pause and you can take an incoming call. • The volume (except for the iPhone ring volume) cannot be adjusted using the volume control on the iPod when it is connected to the unit. • Some popping noise may occur when turning on the iPod. Turn on the iPod and the unit, and then place the iPod in the unit. • Loud sound may come out suddenly, depending on the volume settings of each. To use the unit as a battery charger Plug the AC cord into the mains. And put the iPod into the main unit's connector. Battery charging starts automatically. The charging conditions appear in the iPod display. For details, see the user's guide of your iPod. When you press POWER to turn off the unit, the display of the connected iPod is also turned off. However, the iPod will not be locked in that condition and information stored in the iPod may be viewed by other people. To remove the Dock adapter for iPod To remove the Dock adapter for iPod, pull it up with your fingernail or a flat object using the slot inside the adapter. 11GB Listening to external equipment Listening to external equipment Portable audio player, etc. AUDIO IN Connecting cable (not supplied) How to listen 1 Connect the connecting cable. 2 Press POWER ON/Standby. 3 Press INPUT, confirm the indicator is on, and then start play back of your portable audio player. 4 Adjust the volume using Volume +/– on the main unit. Tip • You can listen to music on iPod models other than those listed as compatible iPod models (refer to “Compatible iPod/iPhone models”) by connecting the iPod to the AUDIO IN using the connecting cable (not supplied). • You can also use the BASS BOOST, POWER, VOLUME, and MUTING of the remote commander to operate. 12GB Troubleshooting Troubleshooting All indicators flash. • The system is in protect mode. • Disconnect and reconnect the AC cord of the unit, then turn the unit on again. If all indicators still flash, consult your nearest Sony dealer. There is no sound. • Update your iPod* to use the latest software before you use it. • Check the connections. • Press VOLUME + on the main unit. If the volume is still low even after the system’s volume is turned up to the maximum level, adjust the volume of the connected portable audio player (when using AUDIO IN). • Remove the protect case of the iPod*, and make sure the iPod* is securely connected. • Make sure the iPod* is playing music. • Check that the correct function is selected. The remote does not function. • Remove any obstacles between the unit and the remote commander. • Point the remote at the main unit’s sensor. • Replace the battery. • Locate the system away from fluorescent lights. • Connect the iPod* to the connector securely. • Update your iPod* to use the latest software before you use it. There is a severe hum or noise. • Move the system away from the source of noise. • Connect the system to a different mains. The sound is distorted. • Press VOLUME – on the main unit to reduce the volu...