Votos - 2, Puntuación media: 3
(
)
)
|
Fotos y especificaciones Sony RDP-M5IP |
Resumen del manual
. Move closer to the unit when using the remote commander. If the problem persists, consult your nearest Sony dealer. Specifications Section for iPod DC out: 5 V MAX: 1 A General Speaker Approx. 5.0 cm dia. 6 . Input AUDIO IN jack (o 3.5 mm stereo minijack) Power output 2 W + 2 W (at 10% harmonic distortion) Power requirements DC IN 6V Dimensions Approx. 226 mm . 165 mm . 164 mm (w/h/d) Mass Approx. 1.1 kg (not including batteries) Supplied accessories Remote commander (1) AC adaptor (1) Universal Dock Adapter . for iPhone (1) Universal Dock Adapter . for iPhone 3GS/ iPhone 3G (1) Universal Dock Adapter . for iPhone 4S/ iPhone 4 (1) Design and specifications are subject to change without notice. OPR/BATT Remote sensor Docking Tray iPhone . ./. OPR/BATT Remote sensor Docking Tray iPhone . ./. iPod & . VOLUME + When to replace the battery With normal use, the battery (CR2025) should last for about 6 months. When the remote commander no longer operates the unit, replace the battery with a new one. the .side facing up Operations Power source You can use this unit by using house current or installing batteries. Power management system After playback of the iPod (or component connected to AUDIO IN jack) has finished, if no operation is performed for about 20 minutes, the unit will automatically turn off. To use house current Connect the supplied AC adaptor to the DC IN 6V jack on the back of this unit firmly, and plug it into a wall outlet. Notes on the AC adaptor .When operating the unit by the internal batteries, remove the AC adaptor from the wall outlet and the DC IN 6V jack. Make sure that the plug of the external power source is disconnected before operating the unit. .Use the supplied Sony AC adaptor only. The polarity of the plugs of other manufacturers may be different. Failure to use the supplied AC adaptor may cause the unit to malfunction. To install batteries Insert four AAA/LR03 alkaline batteries, or four NH-AAA rechargeable batteries (not supplied). Battery Life (Approx. hours) (JEITA*) Battery type Usage time Sony AAA/LR03 alkaline battery 10 Sony NH-AAA rechargeable battery 8 * Measured by JEITA (Japan Electronics and Information Technology Industries Association) standards. The actual battery life may vary depending on the circumstance of the unit. When to replace the batteries When the batteries are weak, the OPR/BATT indicator will become faint, and the sound may be distorted. Notes on batteries . Manganese batteries cannot be used. . The unit cannot recharge any batteries. . Do not carry batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the batteries are accidentally contacted by a metallic object. .Be sure to observe the correct polarity when installing the battery. .If you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage and corrosion. .Do not use different types of batteries at the same time. .When you replace the batteries, replace them all with new ones. .Battery performance depends on manufacturer and type, and battery life may be shorter, especially when used in low temperature. To charge your iPod (AC only) You can use the unit as a battery charger for your iPod when the power is supplied by the AC adaptor. Charging begins when the iPod is connected to the unit. The charging status appears in the display on iPod. For details, see the user’s guide of your iPod. To turn the unit on/off Press ./. (power). The OPR/BATT indicator will light up when the unit is turned on. Remote commander Before using the supplied remote commander for the first time, remove the insulation film. Aim the remote commander at the (Remote sensor) of the unit. VOL + and . buttons have a tactile dot. ./. (Power)* Turns the unit on/off. The OPR/BATT indicator lights up when the unit is turned on. . (Play/Pause) . Start playing iPod. Press again to pause/resume playback. . Press and hold to turn off the iPod. . (Forward) . Go to the next track. . Press and hold while listening to the sound to locate a desired point. . Press and hold in pause while observing the display on iPod to locate a desired point. . (Backward) . Go back to the previous track. During playback, this operation returns to the beginning of the current track. To go back to the previous track, press twice. . Press and hold while listening to the sound to locate a desired point. . Press and hold in pause while observing the display on iPod to locate a desired point. . (Up)/. (Down) Select a menu item or track for playback. MENU . Go back to the previous menu. . Press and hold to go back to the main menu. ENTER Execute the selected menu item or begin playback. VOL +/. (Volume plus/minus) Adjust the volume. * When using batteries, press the ./. button on the unit. The ./. button of the remote commander works only when the AC adaptor is used. Note . If you are not going to use the remote commander for a long time, remove the battery to av...