Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Only use attachments/accessories specified by the manufacturer. • Refer all ser vicing to qualified ser vice personnel. Ser vicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • The batter y shall not be exposed to excessive heat such as sunshine, fire or the like. • Apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Caution • Removal of the built-in batter y invalidates the warranty and may destroy the product. Always bring your product to a professional to remove the built-in batter y. Note • The type plate is located on the back of the product. EN EN 3 2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this speaker, you can • listen to audio from an external device via Bluetooth connection, • listen to audio from an external device through the AUX socket, and • make phone calls. What's in the box Check and identify the contents of your package: • Main unit • USB cable • Short user manual • Safety sheet SBT10 Short User Manual Always there to help you Register your product and get support at Question? Contact Philips Overview of the speaker a b d e f a • Power the speaker on or off. • When the speaker is powered off, press and hold to clear pairing information. b • During a call, mute the integrated microphone or release it from mute status. • Star t, pause, or resume play. • Press to answer an incoming call. • Press to end the current call. • Press and hold to reject an incoming call. • Press twice to dial the last called number. • Press twice to hold on the current call and answer another incoming call. c g h d Bluetooth indicator • Indicate the current Bluetooth connection status. e AUX • Connect to an external player. f DC 5V • Recharge the built-in batter y. g Integrated microphone h BATT • During charging, indicate the current batter y status. EN 3 Get started Always follow the instructions in this chapter in sequence. Charge the built-in battery The speaker is powered by a built-in rechargeable batter y. Note • Before use, fully charge the built-in batter y. Connect the USB cable between • the DC 5V socket on the speaker, and • a USB socket of a computer. Charging indicator The indicator on the bottom indicates the batter y status during charging. Indicator Battery Solid Under charging Power on/off Press and hold for 2 seconds. Note • If an audio input cable is connected to the AUX socket, this product does not automatically power off. To save batter y power, disconnect the audio input cable or manually power off the product after use. • In Bluetooth mode, if Bluetooth connection is invalid for 15 minutes, this product automatically powers off. green Off Fully charged EN 5 4 Use Bluetooth devices With this speaker, you can listen to audio from a player and make a call through Bluetooth. Note • Make sure that no audio input cable is connected to the AUX socket. • Philips does not guarantee the compatibility with all Bluetooth devices. • Before pairing a device with this system, read its user manual for Bluetooth compatibility. • The product can memorize a maximum of 8 paired devices. • Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices. • Any obstacle between this system and a Bluetooth device can reduce the operational range. • Keep away from any other electronic device that may cause interference. Connect a device 1 Power on the speaker. 2 On your device, search for Bluetooth devices. 3 In the device list, select PHILIPS SBT10. • If a message prompts for the permission for Bluetooth connection with PHILIPS SBT10, confirm it. • If a password is required, enter 0000 and then confirm. Note: Make sure that no audio input cable is connected to the AUX socket. Bluetooth indicator Indicator Bluetooth connection Blinking Connecting or waiting for blue connection Disconnect a device On your device, disable the Bluetooth connection with this product. Note • Before connecting another Bluetooth device, disconnect the current device first. Reconnect a device • For a paired Bluetooth device on which the automatic reconnection is enabled, this product reconnects with it once it is detected. • For a paired Bluetooth device that does not suppor t the automatic reconnection, reconnect it with this product manually. Play audio via Bluetooth Note • ...