Votos - 0, Puntuación media: 0
(
)
)
|
Fotos y especificaciones Yamaha MSP5A |
Resumen del manual
• Never insert or remove an electric plug with wet hands. If you notice any abnormality • If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. • If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/Power cord Location • Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. • When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Always consult qualified Yamaha service personnel if the device installation requires construction work, and then choose mounting hardware and an installation location that can support the weight of the device, avoiding locations that are exposed to constant vibration, and making sure to use the specifi ed hardware. After construction or installation, have the device inspected by qualified Yamaha service personnel periodically. • If you use a stand, check the stand’s specifications and make sure that it is sturdy enough to support the weight of the speaker. You may need to limit the number of people around the placed stand, in order to avoid toppling the device or causing damage to the internal components. • Before moving the device, remove all connected cables. MSP5A—Owner’s manual 3 • • XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (–). • Do not place the device in an unstable position where it might accidentally fall over. • Do not block the vents. This device has ventilation holes at the rear to prevent the internal temperature from rising too high. In particular, do not place it in any poorly-ventilated location, such as a bookcase or closet. • Do not place the device against a wall or other devices since this can cause inadequate air circulation, and possibly result in the device overheating. Make sure there is adequate space between the device and any surrounding wall or other devices: at least 5 cm at the sides, 10 cm behind and 10 cm above. Connections • Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Handling caution •Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into the bass reflex ports (the two holes on the front of the cabinet). If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel. • Do not use the device for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. • Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors. Yamaha cannot be held responsible for damage caused by improper use or modifications to the device. Always turn the power off when the device is not in use. • Although this speaker system is magnetically shielded, you may need to move it further away from a video monitor or display if unnatural color shift or image distortion occurs. • The rubber feet included in this package can be attached to the speaker to prevent slippage when it is to be used on a slipper y surface. • Air blowing out of the bass reflex ports is normal, and often occurs when the speaker is handling program material with heavy bass content. Interference From Cell Phones Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system. IMPORTANT Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the bottom or rear of the unit. Retain this Owner’s Manual in a safe place for future reference. IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire ...