Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Installation must be carried out by fully qualified installers, in accordance with all the required safety codes and standards that are applied at the place of installation. 5:1 design factor is a generally accepted design standard, however, legal requirements for flying vary by municipality. Please consult you local safety standards office before installing any product. We also recommend that you thoroughly check any laws and bylaws prior to installation. If you lack the skills, training, and proper ancillary equipment to fly a speaker system do not attempt to do so. The Atlas Sound SM8SUB70-B system contains multiple 1.4”-20 inserts to allow most any suspension angle conceivable. ONLY LOAD RATED & CERTIFIED HARDWARE (EYEBOLTS & CABLE) SHOULD BE USED IN THE INSTALLATION OF THIS PRODUCT. These products are available from: ATM Group, Inc., 21000 S. Wilmington Avenue Carson, CA 90810 Tel (310) 834-5914 Fax (310) 834-3042 Loudspeakers flown in theatres, nightclubs, conference centers or other places of work and entertainment must be provided with an independent, correctly rated and securely attached secondary safety – in addition to the principle suspension point(s). This secondary safety must prevent the loudspeaker from dropping more than (6") should the principle suspension device fail. SURFACE MOUNTING The SM8CBKT-B is an Optional C-bracket for wall/surface mounting of the SM8SUB70-B. Whenever the loudspeaker is mounted to a surface using the optional “C” bracket the installer must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely and securely attached both to the loudspeaker and the surface in question, using only the mounting holes. If you are unsure of the integrity of the mounting surface please seek assistance from architects, structural engineers or other specialists. OMNIMOUNT™ Inserts are provided on the top, bottom and back of both models to accommodate Omnimount™ brackets. Use the Omnimount™ 30 series for the SM8SUB70-B. STAND MOUNTING The optional Atlas Sound SSA7 can be used with the top and bottom cabinet inserts to facilitate stand mounting for portable use. HEARING DAMAGE CAUTION: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage. OUTDOOR USE The systems should not be flown or used in permanent outdoor applications under any circumstances. FUSE PROTECTION Units are shipped with a 20A fuse installed. This high current fuse functions as a through connection and offers no protection. If fuse protection is desired please replace the 20A fuse with a 4A fuse slow-blow type (AGC or 3AG type). Please note that for 70V operation the internal transformer with a maximum tap of 60 watts nullifies the need for fuse protection. WARRANTY All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. “This warranty shall extend from the date of purchase for a period of five years on all Atlas Sound products except as follows: one year on electronics and control systems; one year on replacement parts. Additionally, fuses and lamps carry no warranty.” Atlas Sound will solely at its discretion, replace at no charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lighting discharge, or malfunctions when products have modified or operated in excess of rated power, altered, serviced or installed in other than a workmanlike manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to Atlas Sound do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is indeed a written request for an estimate of repair costs before any non-warranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transport charges collect. EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ATLAS SOUND SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FI...