Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
[CRSC] (FM Tuner for models with region code 4 or 6 only) Switches to monaural to decrease noise when reception is poor. [MONO] (FM Tuner for models with region code 2 or 3 only) Select the Monaural reception. [LO.S] (FM Tuner for models with region code 2 or 3 only) Turns the Local Seek function on or off. [ SETUP] Touch to display the SETUP Menu screen. See Setting Up (P.70). [ AUDIO] Touch to display the Audio Control screen. See Controlling Audio (P.82). [ REAR ] Touch to mute the rear speaker. Return to the Top page Radio, Digital Radio, TV Digital Radio Basic Operation (DNX4310DAB only) Most functions can be controlled from the source control screen. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.89). 1345627Control screen 1 Information display/Control switching area Displays the following information. • [DB1] etc.: Band display • MHz/kHz: Frequency display • Preset #: Preset number 2 Multi function key Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.45). 3 Preset key/Multi function menu Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving station or channel in memory. When switched, various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.45). 4 List switching key Touch to switch between the preset list and the information list. 5 Sub function menu The following functions can be performed by using keys in this area. • Switches the band: Touch [DB]. • Tunes in an ensemble: Touch [4][.]. The method of ensemble switching can be changed. See Multi function menu (P.45). • Tunes in a ensemble, service, and component: Touch [<<<<][>>>>]. The method of ensemble, service, and component switching can be changed. See Multi function menu (P.45). 6 Label infomation Displays the list of preset service. Displays the information of the current service: Service Label, PTY Label, Ensemble Label, Audio Quality Return to the Top page Radio, Digital Radio, TV 7 Signal Strength indication Displays the received signal strength of the Digital Radio station. Multi function menu The functions of each key are as follows. [ ] Displays the list of preset stations or services. For details, see List select (P.51). [P1] - [P5] Selects the preset ensemble. Touch for 2 seconds to store the current ensemble into the preset memory. [DLS] Touch to display the Dynamic Label Segment screen. [TI] Sets the traffic information mode on. For details, see Traffic Information (P.52). [SEEK] Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL]. • AUTO1: Tunes in a ensemble with good reception automatically. • AUTO2: Tunes in ensemble in memory one after another. • MANUAL: Switches to the next ensemble manually. [PTY] Searches a program by setting program type. For details, see Search by program type (P.52). Touch to mute the rear speaker. Touch to display the SETUP Menu screen. See Setting Up (P.70). Touch to display the Audio Control screen. See Controlling Audio (P.82). [ REAR ] [ SETUP] [ AUDIO] Return to the Top page Return to the Top page Radio, Digital Radio, TV Radio, Digital Radio, TV TV Basic Operation TV screen Most functions can be controlled from the source control screen and TV screen. NOTE • Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode (P.89). • You can only operate TV with the optional accessory TV tuner KTC-V500N/PV300/N/P connected. • During playback, press the