Votos - 3, Puntuación media: 4 ( )

Fabricar: Kenwood Tamaño del archivo: 3.84 mb Nombre del archivo: Idioma del manual:

2 Tuner Touch [ ]. 1 Sub function menu appears. Touch desired band key. 2 Simple Control screen appears. Touch [ ] in the control screen. 3 The multi function menu appears. Touch [AME] in the multi function 4 Touch [ ] in the control screen. 3 menu. The multi function menu appears. Touch [4] or [.] in the function 5 Touch [AME] in the multi function 4 menu. menu. Auto memory starts. Touch [1] or [.] in the sub function menu. 5 Auto memory starts. 48 4848 49 Return to the Top page Radio, TV Manual memory You can store the current receiving station or channel in memory. Select a station or channel you wish to store in memory. NOTE • For TV, touch center bottom area of the screen if source control screen is not displayed. Touch [P#] (#:1-6) in which you want to store the station or channel for 2 seconds until a beep sounds. Selecting Operation Preset select You can list and select memorized station or channel. Selecting from the multi function menu Touch the desired number from P1 to P6. 1 The unit will tune to the selected station or channel. Selecting from the preset list Touch illustrated area. 1 List Control screen appears. Select a station or channel from the list. Search by program type (FM tuner only) You can tune to a station with a specific program type when listening to FM. Touch [ ] in the control screen. 1 The multi function menu appears. Touch [PTY] in the multi function menu. 2 TUNER PTY Mode screen appears. Select a program type from the list. 3 Touch [Search]. 4 You can search a station of the selected program type. Traffic Information (FM Tuner Only) You can listen and watch the traffic information automatically when a traffic bulletin starts. However, this feature requires a Radio Data System that includes the TI information. Touch [ ] in the control screen. 1 The multi function menu appears. Touch [TI] in the multi function menu. 2 Traffic information mode is set. When the traffic bulletin starts The Traffic Information screen appears automatically. NOTE • It is necessary to have Traffic Information function set to on in order to have the Traffic Information screen appear automatically. • The volume setting during reception of traffic information is automatically stored. The next time the traffic information is received, this unit recalls the volume setting automatically. Return to the Top page Radio, TV Return to the Top page Radio, TV Tuner Setup You can set tuner related parameters. This function is available for models with region code 2 or 3. Touch [ ] in the control screen. Multi function menu appears. 2 Touch [SETUP] in the multi function menu. SETUP Menu screen appears. 3 Touch [Source]. Source SETUP Menu screen appears. Touch [TUNER SETUP] in the list. 4 TUNER SETUP screen appears. Set each item as follows. 5 NEWS Sets a news bulletin interrupt time. Default is “OFF”. AF When station reception is poor, automatically switches to the station that is broadcasting the same program over the same Radio Data System network. Default is “ON”. Regional Sets whether to switch to the station only in the specific region using the “AF” control. Default is “ON”. Auto TP Seek When traffic information station reception is poor, automatically searches for a station that can be received better. Default is“ON”. Language Select Selects a display language for the PTY function. Antenna Control SETUP Allows you to turn off the Radio Data System function to prevent the motor-driven antenna from extending. Default is “ON”. TV Setup You can set the TV signal receiving areas. NOTE • Each operation in this section can be started from the Top Menu screen. For details, see Operating With The Top Menu Screen (P.16). 1 Touch [ ] in the control screen. Multi function menu appears. 2 Touch [SETUP] in the multi function menu. SETUP Menu screen appears. 3 Touch [Source]. Source SETUP Menu screen appears. Touch [TV SETUP] in the list. 4 TV SETUP screen appears. Return to the Top page Radio, TV Set each item as follows. 5 TV1 Area/TV2 Area SetsthepresentTV1orTV2receivingarea. Touch[SET],andselecttheareaandnumber. This function is available only when KTC-V500N/PV300/N/P optional accessory is connected. On Screen TV Sets how to display the information of the TV. Auto (Default): Information appears for 5 seconds when updated. OFF: Does not display any information. Return to the Top page Bluetooth Operation Bluetooth Control Using the Bluetooth function, various functions can be used: listening to the audio file, making/receiving a call. About the cell-phone and Bluetooth audio player This unit conforms to the following Bluetooth specifications: Version Bluetooth Ver. 3.0 Certified Profile Cell-phone: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phonebook Access Profile) SYNC (Synchronization Profile) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) Version Bluetooth Ver. 2.0 Certified Profile Cell-phone: HFP (Hands Free Profile) NOTE • For the cell-phones verifi...

Descargar ahora

Introduzca dos números de la imagen: