Votos - 1, Puntuación media: 5 ( )

Fabricar: Kenwood Tamaño del archivo: 4.86 mb Nombre del archivo: Idioma del manual:

If touched more than 1 second, all the input characters are erased. [Space] Enters a space. [SET] Determines the message and returns to the SMS Create Menu screen. Send the message. DNX7240BT/DDX6054 Audio Control Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. 1 Display the Source Select Screen SRC 2 Display the Audio Control menu In this manual, the above selection is indicated as: Touch [ ] > [ ]. Select the Audio Control item 3 Item Page [Audio Control] 53 [Equalizer] 54 [Tone] 55 [EQ] 54 [Zone Control] 55 [Space Enhancer] 56 [Position] 56 Audio Control You can adjust the front/rear and right/left audio balance. Display the Audio Control screen Touch [ ] > [ ] > [Audio Control]. (page 53) Set each item 1 2 11 DDX6054 1 Adjusts the front/back and left/right volume around the touched area. [2], [3] Adjusts the right and left volume balance. [5], [.] Adjusts the front and rear volume balance. [VOL.Offset] Finely adjust the volume of the current source to minimize the difference in volume between different sources. . • If you have increased the volume first, then reduced the volume using the "VOL. Offset", the sound generated if you suddenly switch to another source may be extremely loud. [Subwoofer Level] Adjusts the subwoofer volume. [Loudness] Turns the Loudness control function On or Off. (DDX6054 only) If turned "ON", high and low tones are automatically enhanced during low volume. Settable only when zone function is set to Off. See (page 55). Nextpage3 English Audio Control [Bass Boost] Sets the amount of bass boost. (DNX7240BT only) "OFF"/ "Step1"/ "Step2" [Stream Information] Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, MP3, WMA or AAC) is displayed. Equalizer Control You can set up the equalizer. 1 2 Display the Equalizer screen Touch [ ] > [] > [Equalizer]. (page 53) Set each item DNX7240BT DDX6054 [SystemQ] Selects an equalizer curve type. You can select any of the following equalizer curves. "Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/ "Jazz"/ "Game"*/ "iPod"*/ "User" . • * DNX7240BT only. • "User" can be selected after graphic equalizer adjustment is carried out. See (page 54). • "User" can be selected after tone adjustment is carried out. See (page 55). • When "iPod" is selected, the [EQ] button is deactivated. "iPod" uses its equalizer function. [SystemQ-Ex] Selects items to be adjusted for tone curve setup. (DDX6054 only) If turned "OFF", only Level can be setup for tone curves. [EQ] Displays the Graphic Equalizer setup screen. (page 54) (DNX7240BT only) [Tone] Displays the Tone curve setup screen. (page 55) (DDX6054 only) Graphic Equalizer Setup (DNX7240BT) You can Manually set the equalizer curve. Display the Equalizer screen Touch [ ] > [ ] > [Equalizer]. (page 53) Display the Graphic Equalizer screen 1 2 3 . • When "iPod" is selected in , the [EQ] button is deactivated. "iPod" uses its equalizer function. Set the Graphic Equalizer 11 1 Gain level can be adjusted by touching the each frequency bar. [2], [3] Sets a frequency. [5], [.] Sets a gain level. [EQ Init] Returns to the previous level which the gain level is adjusted. [Flat] Tone curve becomes flat. [Bass EXT] Bass Extend settings. If turned "ON", it extends the 62.5 Hz to the low register by approximately 20%. [SW Level] Adjusts the subwoofer volume. DNX7240BT/DDX6054 Tone Setup (DDX6054) You can set a Tone curve. 1 2 Display the Equalizer screen Touch [ ] > [] > [Equalizer]. (page 53) Display the Tone Control screen 3 Set the Tone [Bass] Bass adjustment items are displayed. [Middle] Middle adjustment items are displayed. [Treble] Treble adjustment items are displayed. [Flat] Tone level becomes 0 (flat). [FREQ] Sets the Center frequency. [Level] Sets the level. [Q Factor] Sets the Q factor. (Only [Bass] and [Middle] can be set) [Bass DC EXT] Bass DC Extend settings. (Only [Bass] can be set) If turned "ON", it extends the bass center frequency to the low register by approximately 20%. [SW Level] Adjusts the subwoofer volume. Zone Control Display the Zone Control screen Touch [ ] > [ ] > [Zone Control]. (page 53) Set the Zone Control You can set the front and rear audio source. 1 2 [Single Zone] Turns off the dual zone. [Front Source] Sets the front audio source. [Rear Source] Sets the rear audio source. . • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. [Rear VOL.] Adjusts the volume of the rear channel. . • There are following limitations when zone function is set to "ON". -There is no output from the subwoofer. - (page 54), (page 56), (page 56), (page 71), (page 72), and (page 73) are not available. English Audio Control Space Enhancer (DNX7240BT) You can enh...

Descargar ahora

Introduzca dos números de la imagen: