Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
IV. Switching off the alarm
English
• During alarm call, press any button except
REPEAT ALARM /
.
BRIGHTNESS CONTROL
I. Connecting power
➜Alarm will auto reset daily.
• Connect the supplied mains adapter to the set’s
OR,
9V DC jack and the plug into a wall outlet.
• Press REPEAT ALARM /
.
BRIGHTNESS CONTROL
to enable repeat alarm in 9 minutes.
II. Setting time and date
• To switch off alarm completely, press ALARM 1
or ALARM 2 repeatedly until is changed
1. Press MENU.
to .
2. Use 1 2 to highlight “Clock”.
3. Use 3 4 to select a field of “Time Set” and “Date
➜When alarm is deactivated, displays. When it
is activated, displays.
(Year-Month-Day)”.
4. Press OK to confirm.
Helpful hint:
5. Press or hold down 3 4 to set the values.
• During alarm call, if no button is pressed, alarm call
6. Press OK to confirm.
will last 30 minutes.
7. Repeat Steps 3-6 to set other values of “Time Set
• To set the alarm sound with specific music, select
and “Date (Year-Month-Day)”.
desired music in the “Alarm Music” of the Clock
8. After finishing the setting, press CLOCK,
menu.
TUNER, PHOTO/VIDEO or MUSIC to exit
the setup menu.
Helpful hint:
In the clock mode, to zoom the picture displayed,
press and hold CLOCK for around 2 seconds, then
press OK repeatedly to enlarge picture or resume
to normal size, and use 1 2 3 4 to pan the
enlarged picture through. To exit the zoom mode,
press CLOCK again.
Before zoom
V. Tuner
1. Press TUNER.
2. Press MENU.
➜The Tuner menu appears.
3. Press 4 to select “Tuner Auto Program”.
4. Press OK to start the auto search and
programming.
After zoom
➜ 20 available stations are programmed (FM).
5. Press 3 4 once or more to select your desired
station.
• In TUNER mode, to turn off radio, press OK. To
turn on radio, press OK again.
III. Setting/Activating alarm time
• To auto tune to a radio station, press and hold
You can set two different alarm times.
press and hold 1 2 for about 2 seconds, then
1. Press CLOCK.
release. (To store particular station, refer to
2. Hold down ALARM 1 or ALARM 2 for about 2
“Manual programming” of Tuner section in the
seconds, then release.
user manual.)
3. Press or hold down 3 4 to set hour.
4. Press ALARM 1 or ALARM 2 to confirm.
5. Press or hold down 3 4 to set minute.
6. Press ALARM 1 or ALARM 2 to confirm.
7. Press again ALARM 1 or ALARM 2 to activate
alarm setting.
➜When alarm is activated, displays.
AJL308_37_QSG _Eng_CCR
2
19/9/07, 16:08
...