Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Prepare
Setting the clock
1
/
Press and hold STANDBY-ON y to switch the set to Standby mode
➜ The display shows the set time
➜ -- --:-- -- flashes by default if you have not set the clock
2
In the standby mode, press and hold DISPLAY/CLOCK on the remote control
➜ 12 HR or 24 HR appears for the initial clock setting. To select 24-hour clock or
12-hour clock,
a. Press VOLUME +/- once or more
b. Press DISPLAY/CLOCK to confirm
➜ The hours digits start flashing
3
Hold down or press VOLUME +/- repeatedly to set the hours
IMPORTANT!
– Remove the
4
protective
plastic tab
Press DISPLAY/CLOCK to confirm
before using
the remote
5
control
Hold down or press
Notes for remote control:
VOLUME +/- repeatedly to set the minutes
– First, select the source you wish to
control by pressing one of the source
6
select keys on the remote control (DISC
Press DISPLAY/CLOCK to confirm
or TUNER, for example).
– Then select the desired function
( 2;, í, ë for example).
Enjoy
Playing discs
With this system, you can play all pre-recorded audio CDs (CDDA), all finalized audio CD-Rs
and CD-RWs, MP3/WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files)
1
Press SOURCE once or more to select CD (or CD on the remote control)
2
Press CD OPEN•CLOSEç to open the CD compartment
3
/
Insert a disc with the printed side facing up. Press CD OPEN•CLOSEç again
to close the compartment
4
Press ÉÅ to start playback
5
To stop playback, press STOPÇ
MCM275 QSG_-37-Eng
3
2006.7.26, 13:55
...