Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
The Dynaudio Automotive Esotec and Esotar2 ranges are specifically engineered for optimum performance in a vehicle to ensure the most precise in-car music reproduction possible. Dynaudio's advanced technology is the result of many years of intense research and development mated to the highest quality standards in production and the company's enduring passion for musical truth. Dynaudio is one of very few audio companies producing loudspeaker drivers in-house through its own dedicated development and production departments. All Dynaudio loudspeakers are engineered and manufactured in Denmark from the finest grade materials to the company's extremely high quality standards, and each must pass no less than 86 individual testing stations, representing the most stringent measures in the industry. The state-of-the-art Dynaudio manufacturing facility is so advanced and features such strict quality control measures that Dynaudio is likely to be the only specialty audio company to have exceeded the ISO 9000 quality standard and earn QS 9000 certification. We wish you many years of enjoying and experiencing music at the highest level of performance, Dynaudio About this installation manual This installation manual provides all technical specifications, installation dimensions and crossover connection instructions for the Dynaudio Esotec and Esotar2 series. To realize the full potential of Dynaudio Automotive systems, some areas should be addressed, as touched upon in the following pages. Due to the great variety of installation conditions it will not offer specific instructions how to install the systems into your car. Please refer to the operating manual of your vehicle or ask your local automotive dealer for further assistance. To observe all relevant matters and thus maximize the tremendous performance potential of your Dynaudio in-car loudspeaker system, consult your authorized Dynaudio Automotive loudspeaker dealer for assistance. Your dealer has the knowledge and expertise to perform a high quality aftermarket installation. Safety information As all Dynaudio Esotec and Esotar2 Series components are passive (in that they rely on external amplification), the components themselves can not cause any damage. However, the components can be damaged beyond repair unless a few ground rules are observed: • Insure all components are properly installed and wired correctly. • Observe the technical specifications. • Always use high-quality cabling and amplification. HIGH SOUND PRESSURE LEVELS CAUTION Listening to high sound pressure levels over a prolonged period of time may harm your hearing. • To avoid auditory effects do not listen to high sound levels over a long period of time. Esotec / Esotar2 Series Warranty Dynaudio provides a limited manufacturer.s warranty on Dynaudio Automotive aftermarket products. Please check with your local distributor for warranty conditions. This warranty only covers faults or defects in material and production. Damage caused as a result of abuse, misuse or defective electronics is not covered by the warranty. The warranty will only be valid if the metallic Dynaudio holographic safety label is on the driver. The warranty is valid only if the product is purchased from an authorized Dynaudio Automotive aftermarket dealer. All warranty claims must be accompanied by a copy of the original purchase invoice and warranties are only valid in the country or market of original origin or distribution. Should warranty service be required, it must be arranged for in the country of purchase by an authorized Dynaudio dealer. Esotec / Esotar2 Series Technical specifications Tweeters/Midrange MD 102 MD 142 Esotar2 110 Nominal impedance 8 . 8 . 6 . Recommended frequency range 2200 – 30000 Hz 700 – 6000 Hz 2000 – 30000 Hz Power handling • Nominal long term IEC • Transient 100 W 500 W 100 W 1000 W 150 W 1000 W Net weight 0.126 kg 0.75 kg 0.50 kg Overall dimensions (O x D) 62.2 x 43 mm 121 x 66 mm 111 x 41 mm Woofers MW 152 MW 162 MW 162 GT MW 172 MW 182 Esotar2 650 Esotar2 1200 Nominal impedance 4 . 4 . 4 . 4 . 4 . 4 . 4 . Recommended frequency range 55 – 3500 Hz 40 – 4000 Hz 40 – 4000 Hz 35 – 3500 Hz 30 – 2000 Hz 50 – 4000 Hz 18 – 300 Hz Power handling • Nominal long term IEC 100 W 120 W 120 W 150 W 180 W 200 W 400 W • Transient 1000 W 1000 W 1000 W 1000 W 1000 W 1000 W 1500 W Net weight 1.1 kg 1.2 kg 1.1 kg 1.3 kg 1.85 kg 1.25 kg 8.8 kg Overall dimensions (O x D) 146 x 70 mm 175 x 77 mm 166 x 71 mm 200 x 88 mm 239 x 86 mm 169 x 78 mm 297 x 162 mm Esotec / Esotar2 Series Technical specifications Esotec crossovers X 252 X 362 Crossover frequencies 2200 Hz 900 Hz / 3500 Hz Nominal impedance 4 . 4 . Power handling • MW 152 100 W – • MW 162/162 GT 120 W 200 W • MW 172 150 W 200 W • MW 182 – 200 W Dimensions 38 x 84 x 145 mm 43 x 104 x 175 mm Net weight 0.33 kg 0.60 kg Esotec / Esotar2 Series Technical specifications Installation dimensions Tweeters/Midrange MD 102 MD 142 Esotar2 110 2 1 3 5 4 3 1 2 4 5 6 3 4 5 6 1 ...
Otros modelos de este manual:altavoces del coche y subwoofers - SERIES 2 ESOTAR2 (357.39 kb)