Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
8621-B En.fm Page 4 Wednesday, April 26, 2006 8:33 AM
Safety precautions
Placement
Foreign matter
Set the unit up on an even surface away from direct sunlight, high
Do not let metal objects fall inside the unit. This can cause electric shock or
temperatures, high humidity, and excessive vibration. These conditions can
malfunction.
damage the cabinet and other components, thereby shortening the unit’s
Do not let liquids get into the unit. This can cause electric shock or
service life.
malfunction. If this occurs, immediately disconnect the unit from the power
Do not place heavy items on the unit.
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Voltage
Do not use high voltage power sources. This can overload the unit and
Service
cause a fire.
Do not use a DC power source. Check the source carefully when setting the
Do not attempt to repair this unit by yourself. If sound is interrupted,
unit up on a ship or other places where DC is used.
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead and
contact your dealer or an authorized service center. Electric shock or damage
AC mains lead protection
to the unit can occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
Ensure the AC mains lead is connected correctly and not damaged. Poor
connection and lead damage can cause fire or electric shock. Do not pull,
Extend operating life by disconnecting the unit from the power source if it is
bend, or place heavy items on the lead.
not to be used for a long time.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead
can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
- If you see this symbol-
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
Troubleshooting guide
Specifications
Before requesting service, make the following checks. If you are in doubt
RF SECTION
about some of the check points, or if the solutions indicated in the table do not
solve the problem, consult your dealer for instructions.
Wireless module
Frequency range
2.403 to 2.425 GHz
No. of channels
23
On your home theater unit
RF output power
14 dBm (Max)
The wireless ≥There is no link between the home theater unit and the
AMPLIFIER SECTION
link indicator
wireless system. Check that the wireless system is
Output power
(e.g. “ [W] ”
connected to the mains socket.
RMS output power: Dolby Digital Mode
or LED) is
Surround Ch
110 W per channel (3 ≠), 1 kHz, 10 % THD
flashing.
Total RMS Dolby Digital mode power
180 W
The wireless ≥Check that the home theater unit is turned on, and the
DIN output power stereo mode
link indicator
wireless system is connected to the mains socket.
Surround Ch (both ch driven)
50 W per channel (3 ≠), 1 kHz, 1 % THD
(e.g. “ [W] ”
≥Ensure that the digital transceiver is fully inserted into the
Total DIN stereo mode power
100 W
or LED) does
slot of the home theater unit.
NAME PLATE IMPEDANCE INDICATION:
3 to 6 ≠
not light.
GENERAL
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
SH-FX80T
0.85 W
SE-FX60
30 W
Dimensions (WtHtD)
SH-FX80T
97 mmk47.5 mmk8.5 mm
Maintenance
SE-FX60 89
mmk189 mmk180 mm
Mass
SH-FX80T
0.03 kg
Clean this unit with a soft, dry cloth.
SE-FX60 0.7 kg
≥Never use alcohol, paint thinner or benzine to clean this unit.
Operating temperature range
r5 oC to r35 oC
≥Before using chemically treated cloth, carefully read the instructions that
Operating humidity range
5 % to 90 % RH (no condensation)
came with the cloth.
Power consumption in standby mode
4 W
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer.