Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
To stop Seek Tuning, press TUNEi or TUNEk again. Monaural mode When signals become weak, or reception becomes poor, the unit automatically switches to Monaural mode to reduce noise. Local mode Local mode allows you to tune in only to strong stations during Seek Tuning. 1 Press LO before you start seek tuning. “LO” appears in the display. To return to Distant mode, press LO again. “LO” disappears and the unit tunes in to all receivable stations. Using preset stations You must preset stations before you can tune in a station using preset station number buttons. Preset station buttons 1 ~ 6 Preset station number Presetting stations automatically (Auto Memory) 1 Press FNC repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2). 2 Press and hold PS/A.ME until automatic presetting starts. The unit automatically stores up to 6 stations for each band. After completion of automatic presetting, the unit tunes in to the station stored on preset station button 1. To cancel automatic presetting, press PS/A.ME again. Checking the preset stations (Preset Scan) 1 Press PS/A.ME briefly. Each preset station will be tuned in for 5 seconds in order. To cancel Preset Scan, press PS/A.ME again or any preset station button. 3 33 ENGLISH ENGLISHENGLISH Presetting stations manually (Manual Memory) 1 Press FNC repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2). 2 Press TUNEior TUNEkto tune in to a desired station (see “Tuning in to a station,” page 3). 3 Press the desired preset station button until the unit beeps. Note A newly preset station replaces the station on the same band that was previously stored on that preset station button. Tuning in to a preset station 1 Press FNC repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2). 2 Press the preset station button on which the desired station is stored. Active tuning reception control (ATRC) The unit automatically suppresses FM noise caused by vehicle movement, and maintains sound quality. Using the timer (My Information) You can schedule the radio to activate for daily radio programs. The unit automatically turns on and off in Radio mode at the scheduled times. MY INFO indicator Smart Job Setting the timer 1 Turn off the unit. 2 Press and hold INFO until “PO” flashes in the display. 3 Press SEL. 4 Set the time you wish the unit to turn on. • Press TUNEiand turn the Smart Jog to set the hour. • Press TUNEk and turn the Smart Jog to set the minute. 5 Press SEL. 6 Press FNC to select the band. 7 Press TUNEi,TUNEkor the desired preset station button to select the station. 8 Press SEL. 9 Set the time you wish the unit to turn off following the same procedure used in step 4. 10 Press and hold INFO until the unit turns off, and setting is completed. When the unit is on, “MY INFO” appears in the display indicating that the unit is standby for a timer. During the timer-activated tuning, “MY INFO” continues to flash. To cancel the timer standby, press INFO so that “MY INFO” disappears. Note • To discontinue the timer setting, press and hold PWR/ MUTE until the unit turns off. • To check the setting, turn off the unit, then press INFO. The unit displays the scheduled turn-on and turn-off times with the appropriate radio frequency. • The unit automatically starts tuning at the scheduled time regardless of the current source mode. When the scheduled program is over, the unit automatically returns to the former source mode. • Timer setting remains enabled even if you turn off the unit, and then turn it on. • However, if you press FNC to change the source mode during timer-activated tuning, the scheduled program is canceled. ENGLISH ENGLISHENGLISH 4 44 CD PLAYER OPERATION Playing a CD You can play CDs, CD-Rs and CD-RWs using the procedure described below. 1 Insert a CD. “CD” appears in the display. CD play starts. If a CD is already inserted, press FNC repeatedly to select CD play mode. In normal play, when the last track finishes, the unit returns to the first track and continues to play. Labeled-side up CD indicator Track number Elapsed playing time To Press Eject a CD z Skip to the next track t Go back to the beginning r of the current track Each extra press skips backward one extra track Locate a specific point in Press and hold ror a track tuntil you find the point. Note • When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track. • A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction. • If a CD-R or CD-RW with no data or incompatible data is inserted, “E03” will appear in the display. The unit cannot play such discs. Intro Play You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD. 1 Press INT during CD play. “SCAN” appears in the display. 2 Press INT again when the desired track is played. The unit returns to normal CD play. One track Repeat Play You can play a track repeatedly. 1 Pr...