Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
Audio R Input Jack 10. Eject Button 11. Remote Control Sensor 12. DC 12V Power Supply Input 13. IR Input 14. Antenna Input 15. Monitor Output Port 1 16. Monitor Ouptut Port 2 17. Video Output Jack 18.Audio L Output Jack 19. Audio R Output Jack 5 E. Remote Control View (Refer to Figure 2) 1) DVD/TV/ AUX Button 2) Power Button 3) Display Button 4) Angle Button 5) Subtitle Button 6) Repeat Button 7) A-B Repeat Button 8) Menu Button 9) Slow Button 10) Pause Button 11) Forward Scan Button 12) Reverse Scan Button 13) Skip+ Button 14) Skip- Button 15) Auto memory Button 16) Channel Up Button 17) Zoom Button 18) Eject Button 19) Numeric Keypad 20) Audio Button 21) Setup Button (Next) 22) Up/Down/Left/Right / Enter Buttons 23) Return Button 24) Stop Button 25) Play Button 26) Channel Down Button Figure 2 6 7 F. Connections Figure 3 1. Powering Your DVD Player ( Refer to Figure 3) Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the back of the unit. 2. Remote IR Receiver ( Refer to Figure 3) Plug the 1/8” jack on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location. Figure 4 3. Connecting to an Audiovox Overhead Monitor The AVD300T can be connected to Audiovox Overhead monitors with the supplied adaptors (DVRCA and 4 pin to 2 pin power adapter) when using the Audiovox accessory cable (part number 8010730). Plug in the 3 RCA jacks, white (left audio) to white, red (right audio) to red, and yellow (video) to yellow. Connect the IR jacks. Connect the 4 pin to the 2 pin power adapter, 4 pin to the accessory cable and the plug into the AVD300T power jack. 4. Connecting to a Monitor a. Match the color-coded plugs to the appropriate jacks on the back of the DVD Player A/V OUTPUT jacks: Yellow (video) to Yellow, White (left audio) to White, and Red (right audio) to Red. 8 Figure 5 b. Connect any of the two monitor ports on the back of the DVD player directly to the Movies 2 Go headrest hoods Model MMH56 B/T/G. Power, audio, video and IR signals are supplied through the DIN cable. c. Using the supplied adapter (Part Number DVRCA) the monitor port can be connected to any monitor. 5. Connecting an External Video Source To connect a video game or another audio/video source, plug the A/V output jacks into the matching color-coded A/V input jacks on the front of the DVD player. Press the DVD/TV/AUX button on the remote until AUX is displayed on the monitor. G. Playing After connecting power to the unit, press the power button on the main unit momentarily. The power light will increase in brightness. Insert the disc into the slot on the front of the unit, the unit will load the disc and start playing automatically: If there’s a disc inside the unit, press the POWER button, the unit will start playing automatically. 9 1. Basic Operation POWER EJECT PLAY SLOW PAUSE STOP NEXT PREVIOUS FORWARD REVERSE UP/DOWN/LEFT/RIGHT ENTER NUMBERS RETURN MENU REPEAT A-B DISPLAY ANGLE SUBTITLE AUDIO ZOOM SETUP DVD/TV/AUX AUTO MEMORY CHANNEL UP CHANNEL DOWN Turn the unit on/off Eject the disc Start Play Play at 1/2, 1/4, 1/8 or 1/16 times speed Still Picture (1 time) Stop at the present playing point / (2 times) Stop playing Go to the next chapter, track or scene during play back Go back to the preceding chapter, track or scene during play back Scan forward at 2, 4, 8, 16, or 32 times normal speed Scan backward at 2, 4, 8, 16, or 32 times normal speed Used for Menu Navigation Execute item or setting Select item, setting, or TV channel Return Display the root menu of the disc Repeat playing title, chapter, or track Repeat a specific portion from point A to point B of the disc Display information (title, chapter, track, time, etc.). Change the angles on the scene Select the subtitle language Select the audio language Enlarge an image to 2, 3, or 4 times the original Display the setup menu to select and set items, and exit the setup menu. Change sources (DVD, TV and AUX) Search channels and store them automatically Choose the next channel Choose the previous channel 10 2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. Contents of the menu will vary depending on the disc content. Press MENU during playback to display the root menu. Some DVDs only allow you to select disc playback options using the DVD root menu. 3. DISPLAY 1). PLAYING TIME AND REMAINING TIME a. During playback press the ‘DISPLAY’ button to display the current Title Number (1), the total Number of Titles (2), the current Chapter Number (3), the total Number of Chapters (4), and the elapsed Time for the title (5). The heading will disappear automatically after 3 seconds if no other buttons are pressed. Title, Chapter Number, and Time Screen Display b. Press ‘DISPLA...