Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
The radio will then retune to the station that it received last. • If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CD-changer mode to the station whose programme type matches the one you selected. • If you do not want this PTY EON switching, disable it in the menu with "PTY off". First, press one of the SRC/ > or BND/TS ? buttons. Switching PTY on/off . Press the MENU button :. . Press the or button 6 repeatedly until "PTY ON" or "PTY OFF" appears on the display. . Press the or button 6 to switch PTY ON or OFF. . Press the MENU button :. Selecting the PTY language You can select the language for the display of the programme types. Options include "DEUTSCH", "ENGLISH" and "FRANCAIS". . Press the MENU button :. . Press the or button 6 repeatedly until "PTY LANG" appears on the display. . Set the desired language using the buttons 6. When you have finished making your changes, . press the MENU button : twice. ENGLISH 37 Radio mode Traffi c information Selecting a programme type and starting seek tuning . Press the or button 6. The current programme type appears on the display. . If you want to select another programme type, you can do so by pressing the or button 6 whilst this display is visible. The selected programme type appears briefly on the display. . Press the or button 6 to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type. Optimising radio reception HICUT The HICUT function improves reception during poor radio reception (only FM). If reception interferences are present, the interference level is automatically reduced. Switching HICUT on/off . Press the MENU button :. . Press the or button 6 repeatedly until "HICUT" appears on the display. . Press the or button 6 to adjust the HICUT setting. "HICUT 0" means no automatic reduction of the interference level, "HICUT 1" means automatic reduction of the interference level. . Press the MENU button :. Traffi c information Your device is equipped with an RDS-EON receiver. EON stands for Enhanced Other Network. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffi c reports to the appropriate traffi c information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme that you were listening to before. Switching traffi c information priority on/off . Briefl y press the TRAF button =. The priority for traffic announcements is activated if the display shows the traffic jam symbol. Notes: You will hear a warning beep: • If you leave the reception area of a traffic information station that you are currently listening to. • If you are receiving a traffic information station and the volume is set to minimum (0) or if you leave the broadcast area of the set traffic information station while listening to a CD, a CD changer or AUX and the subsequent automatic seek tuning does not find a new traffic information station. • If you retune the radio from a traffic information station to a station that does not broadcast traffic information. Traffi c information CD mode If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffi c announcements . Press the MENU button :. . Press the or button 6 repeatedly until "TA VOLUME" appears on the display. . Adjust the volume using the but tons 6. When you have finished making your changes, . press the MENU button : twice. Notes: • Using the volume control 3, you can also adjust the volume during a traffic announcement for the duration of that announcement. • The volume distribution can be adjusted for traffic announcements. For further information, please read the "Sound" chapter. CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Caution! Labelled or shaped CDs can damage the CD drive. • Do not insert any shape CDs. • Do not attach labels to CDs since the label may detach during operation. Note: Label CDs only by using a marker since it does not contain any caustic materials. Permanent markers can damage CDs. To ensure proper functioning, use only CDs with the Compact-Disc logo. Copy-protected CDs can cause playback problems. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Switching to CD mode If there is no CD inserted in the drive, . gently insert the CD with its printed side up into the CD tray 4 until you feel some resistance. The drive draws in the CD automatically. You must not assist or hinder the drive as it draws in the CD. The CD starts playing. The display shows the CD symbol. ENGLISH 39 CD mode Notes: • The CD symbol indi...
Otros modelos de este manual:Unidad - 7 647 492 310 (900.42 kb)