Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Please refer to the section on “DSC programming - READ KC”. Short Additional (S.A.M.) The second KeyCard specialised dealer allows short information, which will display, such as, for example, number of your car dealer or the call number of your automobile The freely selectable text with a maximum of 162 characters can be programmed by any dealer who has the required equipment available. Turn On Message (T.O.M.) The second KeyCard available from your specialised dealer also allows you to display a special turn-on message each time the radio is switched on. The freely selectable text with a maximum of 48 characters can be programmed by any dealer who has the required equipment available. Each time you turn on your system with the second KeyCard, the programmed text will appear in the display. Optical display Flashing light diode ? When the vehicle is stationary Card has been removed, be switched to flash for extra For this it is necessary that the positive supply line and the permanent +12 are connected such as described in the instructions. Make sure that the unit is switched off; the operating panel is unlocked; the KeyCard has been removed; “LED ON” has been selected in the DSC mode (factory setting). If necessary, please refer to the section on “DSC programming - LED”. Switching off the flashing light The flashing light can be switched off by selecting “LED OFF” in the DSC menu. ENGLISH 51 KeyCard KeyCard Care of your To ensure that the properly it is important free from any foreign particles. skin contact. If necessary, clean the KeyCard using a cotton swab soaked in rubbing Lost or damaged KeyCard If the KeyCard for your unit is lost or damaged you can train a new KeyCard. You can purchase the new KeyCard from any authorised dealer. You will also require the master code for the unit, which you will find in the radio pass. Always keep the radio pass in a safe place. Do not leave it in your vehicle. Training the • Insert the new KeyCard and lock the operating • Press ON. • Within the next 5 seconds, press TU and ST1. “0000” will appear in the display. • Now use the rocker switch to enter the four-digit master code in the radio pass: / - Enter digits (press as often as required) << / >> - Select the entry position. • Press ENT after you have entered the correct master code. The new KeyCard has been accepted when the unit switches to play. Making mistakes in the entry If you enter the wrong code, “CODE-ERR” will appear in the display. If you enter the wrong code three times, “WAIT 1h” will appear in the display. The unit will switch to a standby mode for one hour. • Switch the unit off and on again. Repeat the steps to train the new KeyCard, but be sure to enter the correct master code. Selecting mode You can select from operating modes: radio (changer). CD cannot be selected unless in the drive. CDC cannot be selected unless Blaupunkt changers, the A 06, the the A 08, the A 05, or the A 071 has connected and there is at least one CD the magazine. To switch the operating mode: • press TU, CD or CDC. If you press TU again, the unit will switch to menu level 2. On this level it is possible to adjust the functions for radio operation. The unit will switch back to menu level 1 automatically approx. eight seconds after the last adjustment was made. Optimising legibility The viewing angle to allow optimum • Press DSC. • Press the lower part of the switch until “ANGLE” appears in the display. • Press << / >> to set the best viewing angle for your position. When you have completed the setting • press DSC. ENGLISH 53 Radio ( Radio Data System) The Radio Data System offers convenience when stations. More and more radio to broadcast RDS information their programs. As soon as a program has been the station name including a regional if available, will appear in the display, for example, NDR1 NDS (regional program in Lower Saxony, Germany). When RDS is activated, the preset buttons become program buttons. You now know exactly which program you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: AF - Alternative frequency The AF ( Alternative Frequency) function makes sure that the strongest frequency of the currently selected program is always tuned in automatically. Switching AF on/off: For radio operation • Press TU, menu level 2 will appear. • Press the AF button briefly. The function is activated when “AF” lights up in the display. “AF” is highlighted for the corresponding softkey. While searching for the strongest reception signal, the radio may switch to mute briefly. If “SEARCH” appears in the display when you switch on the radio or recall one of the stored frequencies, this indicates that the unit is automatically searching for an alternative frequency. “SEARCH” will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the reception quality of the selected program deteriorate...
Otros modelos de este manual:Unidad - ALABAMA DJ TOKYO RDM 169 (240.91 kb)