Iniciar sesión:
Votos - 2, Puntuación media: 3.5 ( )

Manual de usuario Kenwood, modelo KIV700

Fabricar: Kenwood
Tamaño del archivo: 5.48 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


When a call comes in “CALL” is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The “CALL” display disappears and the audio system comes back ON. When the call ends Hang up the phone. The “CALL” display disappears and the audio system comes back ON. . • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 76). English | 39 Audio Adjustments SRCMENUVolume Audio Control You can adjust following Audio Setting items. Display “Subwoofer Level” “DSP Set” “Equalizer” “BassBoost” “HIGHWAY-SOUND” “Supreme+” “Position” “Balance” “Fader” “2Zone Rear Volume” “Subwoofer” “Detailed Setup” “Car Type” “Speaker Setting” “Car Type Adjust” “X'Over” “Volume Offset” Overview You can set subwoofer level. “–15” — “0” — “+15” “Bypass”: Disables the DSP function. “Through”: Enables the DSP function. Sets the sound quality. -Preset Equalizer Curve Select (page 41). -Manual Equalizer Control (page 41). Sets the Bass Boost level in two steps. “OFF”/ “STEP1”/ “2” Compensates the low volume or bass sound being lost by road noises to make vocal sound clearer. “OFF”/ “STEP1”/ “2”/ “3” Turns ON/OFF the Supreme plus function. Can be set while USB, iPod and Internal Memory source. “ON”/ “OFF” Compensates the sound environment in accordance with the listening position. -Listening Position Selection (page 42). -Listening Position Fine Adjustments (page 42). Adjusts left/right speaker balance. (Left) “L15” — “0” — “R15” (Right) Adjusts front/rear speaker balance. (Rear) “R15” — “0” — “F15” (Front) Refer to (page 43). Turns on/off the subwoofer output. “ON”/ “OFF” To get clear sound, set the sound environment according to the location and size of physically installed speakers with reference to the followings: -Car Type Selection (page 44). -Speaker Setting (page 44). -Car Type Fine Adjustments (page 45). -X’Over Setting (page 46). Sets each source’s volume as a difference from the basic volume. “–8” — “0” (AUX: “-8”— “+8”) “2Zone Select” Sets the Dual Zone System. -Dual Zone System (page 43).“2Zone Front/Rear” “Preset” Sets the audio preset. -Audio Preset Recall (page 47). -Audio Preset Memory (page 46). ( : Factory setting) 1 Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select a source other than “STANDBY”. . SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. 2 Enter Audio Control mode Press the [Volume] knob. 3 Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. 4 Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second. Remarks • DSP Set When “DSP Set” is set to “Bypass”, the DSP function is disabled , and the colored items cannot be set. • HIGHWAY-SOUND Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic. • HIGHWAY-SOUND is not available in tuner source and HD Radio source. • Supreme+ (Supreme Plus) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. The bass and vocal sound that are cut off by encoding are supplemented for the reproduction of natural sound quality. Supplementing is optimized by compression format and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • Dual Zone System Main source and sub source output Front channel and Rear channel separately. 40 | KIV-BT900/ KIV-700 Preset Equalizer Curve Select Manual Equalizer Control You can select following Equalizer curve. You can adjust following Equalizer Control items. Display Equalizer curve “Natural” Natural “User” User* “Rock” Rock “Pops” Pops “Easy” Easy “Top40” Top 40 “Jazz” Jazz “Game” Game “iPod” iPod (During iPod source only) * The Equalizer curve set in the section is recalled. 1 Enter Audio Control mode Press the [Volume] knob. 2 Enter Preset Equalizer mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Equalizer” > “Preset Equalizer”. 3 Select the Equalizer curve Turn the [Volume] knob and press it when the desired item is displayed. . Select the iPod Equalizer curve You can select from 22 Equalizer curve types for iPod when “iPod” is selected. 1. Enter iPod Equalizer mode Press the [Volume] knob. 2. Select the iPod Equalizer curve Turn the [Volume] knob and press it when the desired item is displayed. 4 Exit Audio Control mode Press the [MENU] button for at least 1 second. . • You can select for each source. Band “BAND1” (62.5 Hz) Item “GAIN” Band leve...

Otros modelos de este manual:
Unidad - KIV-BT900 (5.48 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría