Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
only.) Caution: This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser products: Wave length 780 nm Laser Power No hazardous radiation is emitted with safety protection. Label indications and their locations Product complies with DHHS Rules 21 CFR, Subchapter J in effect as of date of manufacture. Matsushita Communication Industrial Co., Ltd. Yokohama, Japan MANUFACTURED Part 15 of the FCC Rules This unit has been manufactured under the part 15 of the FCC Rules. Do not attempt any changes or modifications in this unit. Panasonic Model No. № De Modèle CQ-D PG625EUC Ч»— 03 s 9 Y 12V 4-8 a 15A FM75ÍÍ Manufactured by Matsushita Communication Industrial Co., Ltd. Yokohama Japan Made in Japan Serial No. N‘ De Série i_______j This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. 6 CQ-DPG625/DPG615/DPG600EUC Power and Sound Controls Power Turn the key in the ignition until the accessory indicator lights. Press [PWR] to switch on the power. Press [PWR] again to switch off the power. When power is turned off while the time is displayed, the clock mode remains on. ' Note: When power is switched on for the first time, greeting words display. To cancel this display, press [DISP] once. When a CD is inserted with all power connected, the unit power will automatically turn on and CD loading begins and plays. Volume Turn the dial (©) to the clockwise or counterclockwise to increase or decrease volume. ^Volume Level (0 to 40) ru 1/ 111 P î_fi_ pn_ L U Attenuator • Press [ATT] to decrease volume to about Vio of its previous level. • Press [ATT] again to cancel. Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level adjuster so that you will not be deafened sudden loud volume. This system operates as follows. When [PWR] is switched on, the volume level is low. After that, the volume level gradually returns to its previous level prior to switching off the unit. Power and Sound Controls (continued) S’HDB (Super High Definition Bass) (Only for CQ-DPG625/DPG615EUC) Especially for rock music, the bass-sound will be more powerful. • Press and hold S • HDB [ATT] for more than 2 seconds to be able to listen to high-definition bass. • Press and hold S • HDB [ATT] for more than 2 seconds again to return to the normal tone. Tone Enhancement (Only for CQ-DPG600EUC) • Press and hold LOUD[ATT] for more than 2 seconds to enhance bass and treble tones when listening at low or medium volume. • Press and hold LOUD[ATT] for more than 2 seconds again to deactivate. Changing Audio Modes Press [SEL] to switch the audio mode in the following order. Normal Mode -> VOLUME BASS TREBLE -> BALANCE SUB-W*. FADER <* Only for CQ-DPG615EUC) Bass and Treble Press [SEL] to select the BASS (TREBLE) mode. Turn the dial {©) the clockwise or counterclockwise to increase or decrease the bass/treble response. -12 to+12 CQ-DPG625/DPG615/DPG600EUC i Balance Press [SEL] to select the BALANCE mode. Turn the dial ((§)) to the clockwise or counterclockwise to shift the sound volume to the right or left speakers. R—I 1 to'15 | or R —» 1 to 15 ' Balance Center Fader Press [SEL] to select the FADER mode. Turn the dial ((§)) to the clockwise or counterclockwise to shift the sound volume to the front or rear speakers. FRTj or R 1 to 15 Fader Center Sub-Woofer Volume (Only for CQ-DPG615EUC) Press [SEL] to select the Sub-Woofer Volume mode. Turn the dial (©) to the clockwise or counterclockwise to increase or decrease the Sub-Woofer Volume level. r I / 73 Ml < Tr niu jls mu * L Sub-Woofer Volume Level MUTE (0) to 8 Note: When an Audio control mode (BAS/TRE/BALVFAD/SUB*) is selected but no operation is made within 5 seconds (2 seconds at volume mode), the display will return to the normal operation (Radio, CD, etc) mode. In such a case, press [SEL] again to select the control mode. (* Only for CQ-DPG615EUC) CQ-DPG625/DPG615/DPG600EUC Radio Basics To use this unit other than in North or South America, please change the area mode to the “Tuner 2 area” as follows. [North or South America] Tuner 1 area (Factory setting) FM1 to FM3: 87.9 to 107.9 MHz (200 kHz steps) AM : 530 to 1,710 kHz (10 kHz steps) [Other countries] Tuner 2 area FM1 to FM3: 87.5 to 108.00 MHz (50 kHz steps) AM : 531 to 1,602 kHz (9 kHz steps) To change Tuner area mode (After the wiring and installation are completely done.) 1. Change from TUNER 1 area mode to TUNER 2 area mode © Press [PWR] to switch the power on. © Press [PWR] again to switch the power off. (3) Keep pressing [BAND] down and press [PWR], Then “TUNER 2” area mode is displayed for 10 seconds. 2. Change from TUNER 2 area mode to TUNER 1 area mode. Perform the above steps 0, (2) and © again. TUNE...