Votos - 5, Puntuación media: 4.8
(
)
)
|
Resumen del manual
Selecting a track, moving to the next/previous track While playback or stop the playback you can select the desired track using the . or . buttons. To move to the next track press the . button once. To move to the previous track press in the playback mode the . button. Fast rewind/fast forward Press and hold the . or . buttons to fast forward or rewind correspondingly, sound will be reproduced brokenly. Selecting a folder To select a folder press and hold the +10/FOL+ or -10/FOL- buttons on the remote control for more than 3 seconds, folder numbers will be successively displayed on the LCD-display: F01>F02 etc. When the number of the desired folder appears on the LCD-display, release the button. Different playback modes Repeat/random playback Pressing successively the REPEAT/RANDOM button on the player or on the remote control, you can select one track repeat, the whole disc repeat, folder repeat or random playback Note: In the programmed playback mode, folder repeat is absent. Programmed playback You can program playback of tracks (max. 99) at the desired order. 1. When the playback of the disc is stopped, press the PROGRAM button once. Track number while programming “P-1” will appear on the LCD-display. 2. Select the desired track, successively pressing the . or . buttons. Press the PROG button to store the selected track. 3. Repeat steps 1 and 2 to program other tracks. 4. To playback the programmed tracks press the PLAY/PAUSE/USB button. 5. To stop playback of tracks in the programmed order press the STOP button once. To cancel programmed playback press the STOP button once again. Playback of МР3 files from the external device (USB/ SD/MMC) In the disc playback mode press and hold the PLAY/PAUSE/USB button for more than 1,5 seconds, the CD/MP3 player will switch to the USB mode. The “- - -“ symbols will appear on the LCD-display. To switch to the discs playback mode press and hold this button for more than 1,5 seconds once again. To switch to the SD/MMC mode press and hold the STOP/SD button for more than 1,5 seconds. The “- - -“ symbols will appear on the LCD-display. Press the PLAY button to start playback. While successful reading of the external device, track playback will start. Control buttons and actions sequence while operation with the external device are the same as those while operation with the disc. Maximal number of folders is 500; maximal number of tracks is 999. Note: This unit does not support playback from all HDD and some MP3 players, as well as playback of МР3 files with byte rate more than 256 Kbit/sec from external devices. Note: In case if you switched the CD/MP3 player from the USB mode to the SD/MMC mode and the external device is not connected or cannot be read, “no” will appear on the LCD- display. When there is no disc in the disc slot and the external device is connected, the CD/MP3 player will start reading of the external device. TROUBLESHOOTING GUIDE Improper usage is always the case of trouble. If you consider that there is something wrong with the unit, check possible causes in this table. If you have not managed to solve the problem, apply to the nearest authorized service center or to the dealer for repair. Problem Possible cause Solution No sound Zero level of volume Adjust volume level No power Check the power supply Improper operation of the LCD-display Electrostatic electricity Switch off the unit and switch it on in a while Noise while listening to radio stations in FM or AM band The station is not tuned FM band: the antenna is not extended АМ band: the unit is out of reception area or in the unstable receipt area Tune the station Extend the antenna Try other location variants The player does not playback stations in FM or AM band Radio mode is not switched on Set the operating mode switch to the RADIO position No disc indication / Disc is not played back Disc playback mode is not switched on Switch on the disc playback mode Disc is absent or set improperly Check the disc, it should be placed with its label up CD-R disc is empty or not finalized Use a finalized CD-R disc Condensation on the optical system Wait for a while Some tracks cannot be played back Disc is scratched or dirty Wipe the disc with a soft cloth, do not use the damaged discs Disc is in its place but tracks cannot be played back Disc is placed improperly Check the disc, it should be placed with its label up Disc is scratched or dirty Wipe the disc with a soft cloth, do not use the damaged discs Improper disc format Use discs with corresponding format USB-device No playback USB playback mode is not switched on Switch on the USB playback mode USB-device is not inserted into the jack or it does not contain MP3 files Check, whether the USB- device is inserted or not and that it contains MP3 files Broken playback The unit contains МР3 files with byte rate more than 256 Kbit/sec. Memory card No playback Memory card playback mode is not switched on Switch on the memory card playback mode Memory card is ...