Votos - 5, Puntuación media: 4.4
(
)
)
|
Fotos y especificaciones JVC KD-G117 |
Resumen del manual
To check the current clock time while listening to an FM or AM station ENGLISH Disc operations ENGLISHPlaying a disc All tracks will be played repeatedly until you change the source or eject the disc. Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing Current track time number To stop play and eject the disc To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to a particular track directly To select a number from 01 – 06: To select a number from 07 – 12: Prohibiting disc ejection To check the current clock time while You can lock a disc in the loading slot. listening to a disc ENGLISH To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time. 2 Select your desired playback mode. 1 Repeat play Mode Plays repeatedly TRK RPT: The current track. • RPT lights up. RPT OFF: Cancels. Ex.: When “TRK RPT” is selected Random play Mode Plays at random DISC RND: All tracks of the current disc. • RND lights up. RND OFF: Cancels. Ex.: When “DISC RND” is selected Sound adjustments ENGLISHSelecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.: When “ROCK” is selected *1 BAS: Bass Indication pattern for each sound mode: *2 TRE: Treble *3 LOUD: Loudness Indication For: Preset values BAS*1 TRE*2 LOUD*3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSIC Classical music +01 –02 OFF POPS Light music +04 +01 OFF HIP HOP Funk or rap music +02 00 ON JAZZ Jazz music +02 +03 OFF Adjusting the sound Indication To do: Range BAS*1 Adjust the bass. –06 (min.) (bass) to +06 (max.) TRE*1 Adjust the treble. –06 (min.) (treble) to +06 (max.) FAD*2 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to F06 (Front only) BAL (balance) Adjust the left and right speaker balance. L06 (Left only) to R06 (Right only) LOUD*1 Boost low and LOUD ON (loudness) high frequencies to produce a well- balanced sound at J LOUD OFF low volume level. VOL*3 Adjust the volume. 00 (min.) to (volume) 30 or 50 (max.)*4 ENGLISH You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.” *2 If you are using a two-speaker system, set the fader level to “00.” *3 Normally the +/– buttons work as the volume control. So you do not have to select “VOL” to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 14 for details.) General settings — PSM ENGLISH 3 Adjust the PSM item selected. Basic procedure You can change PSM (Preferred Setting Mode) items listed on the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex.: When you select “AMP GAIN” Indications Selectable settings, [reference page] DEMODEMO ON: [Initial]; Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 seconds, [7]. DEMO OFF: Cancels. CLOCK H0 – 23, [7] Hour adjustment [Initial: 0 (0:00)] CLOCK M00 – 59, [7] Minute adjustment [Initial: 00 (0:00)] AMP GAIN You can change the maximum volume level of this receiver. Amplifier gain control LOW PWR: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent them from damaging the speaker.) HIGH PWR: [Initial]; VOL 00 – VOL 50 Detaching the control panel When detaching or attaching the control panel, Attaching the control panel be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. ENGLISH Maintenance ENGLISH How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the receiver turned on for a few hours until the moisture evaporates. How to handle discs When removing a disc from Center holder its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printe...