Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Caution When being connected in a wrong way, the unit displays as follows. 1. Antenna port short : “ ANTENNA ON PORT SHORT CIRCUIT CHECK” 2. Remote port short : “ REMOTE ON PORT SHORT CIRCUIT CHECK” 3. Antenna port and Remote port short : “ ANTENNA REMOTE ON PORT SHORT CIRCUIT CHECK” After connecting it again, restart the unit. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista) CAR CD/MP3/WMA Receiver Front Panel / Remote 1 EJECT Z 2 [ MUTE] 3 • Skip M? + • Seek M? + 4 Remote Sensor (Optional) 5 • Volume • Power [ PWR] 6 • Auto Store [ AS] • Preset Scan [ PS] • Equalizer [ EQ] 7 DISC SLOT 8 • Search M + • Tune M + 9 Display [ DISP (CLOCK)] 10 Release 11 Select [ SEL S] CAR CD/MP3/WMA Receiver 12 • Search - m • Tune - m 13 Preset Station [ 1-6] 14 • MP3/WMA Track +10/-10 [ F+/F- ] • Folder Up/Down [ F+/F- ] 15 Shuffle [ SHF] 16 Repeat [ RPT] 17 Intro Scan [ SCAN] 18 Play/Pause B X 19 Extreme Dynamic Sound System [ XDSS] 20 [ BAND] 21 • Skip - ? ?? m mm • Seek - ? ?? m mm 22 SOURCE [ SRC S SS] 1 2 3 4 5 6 7 8 9 1 Power [ POWER] / Mute 2 Select [ SEL] 3 Source [ SRC] 4 Play / Pause B/X 5 Intro Scan [ SCAN] 6 Shuffle [ SHF] 7 • MP3/WMA Track +10 • Folder Up [ F+ ] 8 • CD Skip / Search ?m m • Seek / Tune ?m m 9 [ BAND] 10 Volume Up / Down 11 Number [ # ] 12 15 16 11 14 13 10 17 12 Repeat [ RPT] 13 Preset Station [ 1-6] 14 Number [ 0 -9] 15 • CD Skip / Search M M? • Seek / Tune M M? 16 Display [ DISP. ] 17 • MP3/WMA Track -10 • Folder Down [ F- ] About Detachable Control Attaching the control panel 1 Align the left side of the panel with the stopper. 2 Push the right side or panel into the unit until it clicks. 2 1 Caution • The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. • Do not leave the control panel in any area exposed to high temperatures or direct sunlight. • Do not drop the control panel or otherwise subject it to strong impact. • Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. Detaching the control panel 1 Press the “ ” (RELEASE) to open the control panel. 1 2 Hold the right part of the control panel. 2 3 Pull out the control panel. 4 Place the control panel in the supplied protective case. 3 4 Control panel Protective Case Note Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. CAR CD/MP3/WMA Receiver Installation Basic Installation Bend the claws according to the thickness of the dashboard Control panel Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1 Remove the existing receiver unit. 2 Make the necessary connections. 3 Install the installation sleeve. 4 Install the unit into the installation sleeve. Removing the existing receiver unit If there is already an installation sleeve for the receiver unit in the A dashboard, it must be removed. 1 Remove the rear support from the unit. 2 Remove the control panel and trim ring from the unit. A 3 Insert the lever Ainto the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. CAR CD/MP3/WMA Receiver ISO-DIN Installation 1 Slide the unit into the ISO-DIN frame. 2 Fit screws removed from the old unit. 3 Slide the unit and frame into the dash opening. 4 Install the dash panel or adapter plate. 5 Install the trim ring to the unit. 6 Install the control panel to the unit. 5 4 3 126Control panel Battery Installation 1 Pull out the battery holder with a sharp product like a ball point pen. 2 Put the battery with and correctly on the battery holder. 3 Push the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery. • Remove the battery if the remote control is not used for a long period of time. • Do not leave the product in a hot or humid place. • Do not handle the battery with metallic tools. • Do not store the battery with metallic materials. Connection Before connecting, make sure that the and remove the battery # terminal to avoid short circuits. 1 2 3 4 5 6 7 8 4 5 6 7 8 B A1 2 3 BATTERY B 1 B 2 B 3 B 4 B 5 B 6 B 7 B 8 Front Left Front Right Rear Left Rear Right A 5 Power Antenna(Blue) A 6 Dimmer(Pink) A 7 To Ignition(Red) A 4 To Battery(+)(Yellow) A 8 Ground(-)(Black) Power Antenna Control Relay Ignition Switch Dimmer Switch To Audio out Phone Mute(Orange) Remote On(Blue/White) A1, A2, A3: Not connected (Optional) Amplifier (Optional) Amplifier (Optional) To Audio in B 1 Violet : Rear Right + B 2 Violet/ Black Stripe ...