Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
CAR CD/MP3/WMA Receiver 5 [LAC7900RN] Front Panel / Remote Control 1 Power [POWER] / Mute 2 Select [MENU/SEL] 3 Source [SRC] 4 Play / Pause B/X 5 Intro Scan [INT] 6 Shuffle [SHF] 7 • MP3/WMA Track +10 • Folder Up U 8 • CD Skip / Search • Seek / Tune ?m m 9 • [BAND] • DRIVE [DRV] 10 Volume Up / Down 11 Number [#] 12 Repeat [RPT] 13 Number [0 -9] 14 • CD Skip / Search • Seek / Tune M M? 15 Display [DISP.] 16 • MP3/WMA Track -10 • Folder Down u INT 10 12 14 15 16 1 3 8 9 4 5 2 6 7 11 13 1 2 3 4 5 6 7 9 10 11 13 23 22 21 20 19 18 17 16 15 14 1 SOURCE [SRC] 2 • Auto Store [U/AS] • Preset Scan [u/PS] • MP3/WMA Track +10/-10 U/u • Folder Up/Down U/u 3 Skip / Search / Seek / Tune B?+ 4 • ENTER • Volume • [MUTE] • Power [PWR] 5 • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS+] 6 Bluetooth wireless technology [B/T] 7 Remote Sensor 8 Slot CD 9 Display window 10 • Traffic Announcement [TA] • Programme Type [PTY] 11 Display [DISP] 12 Eject 13 Release 14 USB slot 15 AUX in 16 Preset Station [1~6] 17 Shuffle [SHF] 18 Repeat [RPT] 19 Intro Scan [INT] 20 Play/Pause BX 21 • [BAND] • [DRIVE] 22 Select [SEL] / [MENU] 23 Skip / Search / Seek / Tune / Back -?b 8 12 Note There is the microphone in the left top position of the unit when you detach the control panel. [LAC8900RN] About Detachable Control Panel Attaching the control panel Detaching the control panel A B D C 1 Attach part Aof the control panel to 1 Press the “ ” button to unlock part Bof the unit. the control panel. 2 Attach part Cof the control panel to 2 Push the control panel to left. part Dof the unit while pushing the control panel to left. 3 Pull the control panel out of the 3 Close the control panel. unit. Microphone 4 Put the detached control panel into the protective case. Microphone Caution • When detaching or attaching the control panel, do not press the display or control buttons. Microphone Protective CaseControl panel • The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the control panel. • Do not leave the control panel in any area exposed to high temperatures or direct sunlight. • Do not drop the control panel or otherwise subject it to strong impact. • Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. Note • Do not try to disassemble the control panel. Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. CAR CD/MP3/WMA Receiver [LAC7900RN] About Detachable Control Panel Attaching the control panel Detaching the control panel Detaching the control panel 1 2 Microphone 1 Align the left side of the panel with 1 Press the “ ” (RELEASE) to the stopper. open the control panel. 2 Push the right side or panel into the 1 2 Hold the right part of the control unit until it clicks. panel. 2 3 Pull out the control panel. 4 Place the control panel in the supplied protective case. 3 Caution • The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. • Do not leave the control panel in any area exposed to high temperatures or direct sunlight. • Do not drop the control panel or otherwise subject it to strong impact. • Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. 4 Protective Case Control panel Microphone Note Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. CAR CD/MP3/WMA Receiver 7 Installation Basic Installation Bend the claws according to the thickness of the dashboard Control panel Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1 Remove the existing receiver unit. 2 Make the necessary connections. 3 Install the installation sleeve. 4 Install the unit into the installation sleeve. Removing the existing receiver unit If there is already an installation sleeve for the receiver unit in the A dashboard, it must be removed. 1 Remove the rear support from the unit. 2 Remove the control panel and trim ring from the unit. A 3 Insert the lever Ainto the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. ISO-DIN Installation 1 Slide the unit into the ISO-DIN frame. 2 Fit screws removed from the old unit. 3 Slide the unit and frame into the dash opening. 4 Install the dash panel or adapter plate. 5 Install the trim ring to the unit. 6 Install the control panel to the unit. 5 4 3 126Control panel Battery Installation 1 Pull out the battery holder with a sharp product like a ball point pen. 2 Put the battery with...