Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
To Audio out (OPTIONAL) Amplifier (Optional) A 6 Not connected To Audio in (OPTIONAL) Amplifier (OPTIONAL) B 1 Violet / Black Stripe : Rear Right – B 2 Violet : Rear Right + B 3 Gray / Black Stripe : Front Right – B 4 Gray : Front Right + B 5 Green/ Black Stripe : Rear Left – B 6 Green : Rear Left + B 7 White/Black Stripe : Front Left – B 8 White : Front Left + Basic Operation ON PLAYER 1. Turn the unit on. 2. Select a source. 3. Adjust the volume. 4. Turn the unit off. Any key SRC Rotate the volume knob Press and hold OFF Basic Operation ON PLAYER 1. Turn the unit on. 2. Select a source. 3. Adjust the volume. 4. Turn the unit off. Any key SRC Rotate the volume knob Press and hold OFF Basic operation - more you can do Mute 1. Press MUTE to cut the sound. 2. To cancel it, press again. Using EQ(Equalizer) EQ is to increase or decrease the signal strength of audio frequencies. The func tion helps you to enjoy sound more plentifully. Press EQ/ • XDSS+ on the unit repeatedly. The indicator lights up in the following order. POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t REGGAE t RUSSY t USER1 t USER2 t Off(not displayed) Note • When XDSS+ is set to “Off”, you can adjust the EQ settings. • You can adjust sound level to your preference. Once you select a USER mode and press [SOUND], then adjust the sound level(BASS(bass), MID(middle), TRB(treble)), it will be automatically stored for the currently selected USER mode. Refer to the “For sound setting” for USER 1/2 mode. Using XDSS+ (Extreme Dynamic Sound System) It improves the treble and bass sound. 1. Press and hold EQ/ • XDSS+ on the unit. 2. To cancel it, press and hold it again. Checking the clock 1. Press DISP once to check the clock. 2. Press it again to remove it. Turning off the display light 1. Press and hold DISP. 2. Press and hold it again to turn it on. Note Under the light-off condition, press any keys, the light is turned on and then off automatically if you don’t press it within a few seconds. Resetting the unit It resets the unit when it does not operate properly. 1. Press [ ] and pull out the front panel. (Refer to page 6 for detaching the control panel.) 2. Prick the RESET hold with sharp object. Adjusting general settings You can adjust sound, light and other settings by using the MENU button. On the Unit 1. Press MENU. 2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press it. 3. Rotate the volume knob to select the item and press it. 4. Rotate the volume knob clockwise or counterclockwise to adjust the level. 5. Press the volume knob to confirm the setting. If you want to return to the previous step, press . On the Remote Control (OPTIONAL) 1. Press and hold FUNC/ • MENU 2. Press v or V to select [SOUND], [LIGHT], or [OTHER] and press ENTER. 3. Press v or V to select the mode and press ENTER. 4. Press v or V to adjust the level. 5. Press ENTER to confirm the setting. If you want to return to the previous step, press . For Sound setting You can adjust sound quality by adjusting the level of BAL(left/right speaker), FAD(front/rear speaker) and S--W(Sub-woofer:optional). CAR CD/MP3/WMA Receiver For Light setting You can adjust the light effects by adjusting LED, DIM, or DIM L. • LED COL1/ COL2/ AUTO: You can change the LED window color. • DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the display window during the power-on status. When you set DIMMER to AUTO, the dimmer operates according to the car dimmer setting. • DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2) For Other setting • AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. • BEEP 2ND / ALL BEEP 2ND : The beep is generated when a key is long pressed. (1 sec) BEEP ALL : The beep is generated when any key is pressed. • A-EQ(Auto EQ) ON/OFF AUTO EQ operates only in the music file supported with Genre in the device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre. • SW(Subwoofer) OFF / SW 55 Hz / SW 85 Hz / SW 120 Hz You can enable the subwoofer. SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz. • DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source. • CLK(Clock) For the model RDS is not supported or even for a RDS supported unit, when RDS CT information is not received and then you set CT on the setting menu to OFF, you can adjust the time by yourself. Refer to the page 10 for setting the CT(Clock Time) ON/OFF. Listening to a CD ON PLAYER 1. Insert a CD. 2. Adjust the volume. - Rotate the volume knob Listening to a CD - more you can do Pausing or restarting CD playback 1. Press B BB[] on the player during playback. 2. Press it to resume playback. Searching for a section within a track / file 1. Press and hold b?-or +?B on the pl...
Otros modelos de este manual:Unidad - LCS500URS (441.26 kb)