Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
The factory default is automatic scrolling. Display and setting: "AT. SCRL On" : Automatic scrolling "AT. SCRL Off" : Manual scrolling Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. Display and setting: 1 Select the display "AME Ready" during the selecting the function set system. 2 Press either the 4 or . button for at least two seconds to start auto memory function. The numbers of the preset station buttons When all the stations in a certain band memory, the auto memory entry stops. The tuner the last station received. Canceling Auto Memory Entry Press the 4 / . button while auto memory entry place to stop the process. Recalling a Preset Station: Press the preset station The number of the — 27 — Basic Operations of remote Basic Operations of remote English + OK TUNE TRACK DNPP/ SBF DSIC REMOTE CONTROL UNIT 4 . 38 FM + AM – SRC – + SRC TUNE /4/TRACK FM/DISC + TUNE +/. /TRACK + ATT 38 AM/DISC Not used Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries: Use two "AAA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. 2WARNING Store unused batteries out of the reach of children. Contact doctor immediately if the battery is accidentally swallowed. NOTE • The provided batteries are intended for use in operation checking, and their service life may be short. • When the remote controllable distance becomes both of the batteries with new ones. • A portion of the operations may not be possible, the unit that is connected. Basic operations • VOLUME buttons Press the + button to turn the volume Press the – button to turn the volume • SRC button Each time you follows: — 28 — Tuner mode Ў Tape mode Ў CD mode Ў External disc control mode 1 Ў External disc control mode 2/AUX mode Ў Standby mode NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCAS210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS89, KDCCPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 KDC-CX82) or switching adapter CA-C1AX (which allows select AUX mode only). •ATT button Turns down the volume quickly. To return the volume to its original level, press the button again. Turning the volume up, or turning it all the way down deactivates Tuner features • 4/ . (TUNE) buttons Press the 4 button to make decreasing preset tuning mode). Press the . button to make increasing tuning mode). Use to move the • AM/FM buttons Press the Press the FM button to select and switch between FM1, FM2, and FM3 bands. During station name input, selects digits and symbols. • 38 button Selects the type of characters at the time of entering the station name. Cassette player features • 4/ . buttons Press the 4 button to start play again at the beginning of the current track. Press the . button to start play at the beginning of the next track. • AM button Rewinds the tape. • FM button Fast forwards the tape. • 38 button Plays the reverse side of the tape. When pressed during forward and rewind, this button stops the tape and starts it. CD/External disc control features • 4/ . buttons Press the 4 button to search through the tracks backward. Press the . button to search through the tracks Use to move the cursor while entering • DISC buttons (for disc changers) Press the DISC– button to search through the Press the DISC+ button to search through Select numbers and symbols • 38 button When a disc is playing, Press the same Selects the name. — 29 — Accessories Accessories English External view External view ......... Number of items ......... Number of items (M5.8mm) 1 5 ......... 6 ......... 1 2 6 ......... 1 ......... 1 3 7 ......... 1 ......... 1 (M5.8mm) 4 ......... 4 2CAUTION The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent a short circuit, remove the key from disconnect the - battery. 2. Make the proper input and output wire 3. Take Connector on the wiring harness external power connector on your 4. Connect the wiring harness 5. Install the unit in your car. 6. Reconnect the - battery. 7. Press the reset button. If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to t...
Otros modelos de este manual:Unidad - DPX-4020MH4 (1.1 mb)