Iniciar sesión:
Votos - 1, Puntuación media: 4 ( )

Manual de usuario Kenwood, modelo DPX-500

Fabricar: Kenwood
Tamaño del archivo: 2.41 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


To conunteract this, move the gearshift using the utmost care for safety. • Do not open the top or bottom cover. ; • Do not install the unit in places it is exposed to direct sunlight, high heat or humidity, water may splash over it, or dust exists. NOTE • If you have difficulty in installing this unit in your vehicle, contact your Kenwood dealer. • If it doesn't seem to be working properly, first press the Reset button. If the malfunction persists, consult your Kenwood dealer. Cleaning the unit • If the front panel is dirty, wipe it clean with a silicon cloth or soft dry cloth with the power off. ACAUTION Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters. Cleaning the tape head • As you play tapes for a long time, magnetic dust and other grime accumulates around the heads and eventually causes noise that lowers sound quality. To clean the heads, use a cleaning tape or cleaning kit. Make sure you purchase a cleaning tape or cleaning kit suited to car audio use. NOTES ON OPERATION NOTES ON OPERATION SAFETY PRECAUTIONS I Be careful with your tapes. • Before loading a cassette, take up any slack tape, by turning one of the spools with a pencil. Loading a slack tape can cause tape to tangle around the capstan and pinch roller and other problems. • Do not use any deformed cassettes or cassettes with labels coming off, or the unit may fail. • Do not leave cassettes exposed to high heat (for example, on the dashboard where it is exposed to direct sunlight, or near heater outlets). This can deform the cassette shell. • Avoid long cassettes, such as 100-minute tapes. The tape is thin and easily tangled around the pinch roller or other parts. • If you do not listen to your tape, remove it from the unit and store it safely. If a cassette is left in for a long time, the tape can stick to the tape head, causing failure. Before Using the Card Remote Control Be sure to remove the tape from the battery box when using the remote controller for the first time. Replacing the Lithium Battery of the Card Remote Control One lithium battery (CR2025) is used for the remote controller. Be sure to place the battery correctly according the © and © indication inside . the battery box. L The battery life is about six months. ’■ Replace the battery with a new one at ■ regular six month intervals. AWARNING Be sure to store the button-type lithium batteries outside the reach of small children. If accidentally swallowed, seek medical assistance immediately. Cleaning the CD slot • Since dust accumulates in the CD slot, It will cometimes need to be cleaned. Discs loaded in dusty slots may be damaged. Lens fogging • In cold climates, there may be a period after you turn on your vehicle's heater when the lens that guides the laser beam used in your CD player fogs up. If this happens, you cannot play compact discs. Take out discs and the fogging will disappear. If it does not return to normal after several hours, contact your Kenwood dealer. Heat protection Under direct sunlight, the temperature in the car with closed windows becomes high; the DPX-500 with internal temperature above 60 [deg]C activates the protection circuit, which indicates "HOLD," and disables the play of the CD. If this happens, lower the temperature by turning on the airconditioner or opening the window. The "HOLD" display disappears and the play will be resumed. SAFETY PRECAUTIONS acautionI Never use 8 cm (3") adaptors • 8-cm CDs can be loaded without use of an adaptor. They can be played as-is in the same way as any 12-cm CD. Use of an adaptor for 8-cm CDs may result in equipment malfunction or damage. IACAUTION Tinted and/or soiled CDs cannot be used. • If the recording side of the CD (opposite of the label side) is tinted or soiled, it may result in misoperation such as not being loaded into the player or ejected properly. Stains, scratches, or warping can cause skipping, malfunction, or low sound quality. Take the following precautions to avoid damage to the compact discs. Holding a disc • Avoid touching the recorded side (the side without the titles on) when you hold a compact disc. • Do not stick paper tape, etc. on either stick of the disc. Paper tape Storing your discs • Do not store discs where they will be exposed to direct sunlight (such as on the seat and dashboard) or high heat. • If you do not use your unit for an extended time, remove the discs from the unit and put them in their cases. Do not leave them lying around without cases, piled up, or leaning on a wall and so on. Cleaning your discs • If there are stains on a disc, wipe them off with a cleaning cloth or a soft cotton cloth, wiping from the center to the edge. Never use conventional record cleaners, anti static agent, paint thinner, benzine, or other chemicals. Check your new discs • Some new discs have burrs on their outer edges or around the hole i...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría