Manual de usuario Kenwood, modelo DPX-MP5110U
Fabricar: KenwoodTamaño del archivo: 493.33 kbNombre del archivo:
Idioma del manual:
Enlace gratuito para este manual disponible en la parte inferior de la página
Otros manuales para este modelo:
Resumen del manual
• Volume offset: Sets each source’s volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. -Set up the channel of sub source by “Zone2” of
(page 14). -Select Main source by [SRC] button. -Adjust the volume of Front channel by Control knob. -Adjust the volume of Rear channel by (page 7). -The Audio Control has no effect on sub source. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the Control knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the Control knob. 4 Adjust the Audio setup item Turn the Control knob. 5 Exit Audio Setup mode Press the Control knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type Display OFF “SP Off” For 5 & 4 in. speaker “SP 5/4” For 6 & 6x9 in. speaker “SP 6*9/6” For the OEM speaker “SP OEM” 1 Enter Standby Press the [SRC] button. Select the “STANDBY” display. 2 Enter Speaker Setting mode Press the Control knob. “SP SEL” is displayed. 3 Select the Speaker type Turn the Control knob. 4 Exit Speaker Setting mode Press the Control knob. Sound Enhancer Select You can play back adding gorgeous heavy bass to the sound. 1 Enter the Sound Effect mode Press the [SE] button. "SE SEL" is displayed. 2 Select the Sound effect item Turn the Control knob. Sound effect Display Returns to the normal sound without Sound effect. “SE Off“ Moves the sound image up a notch and adjusts bass. “SE Low” Moves the sound image up two notches and adjusts “SE High“ bass. Changes to the value set in (page 9). When the Sound effect is ON, the “SE“ indicator is ON. 3 Exit the Sound Effect mode Press the [SE] button. 8 | DPX-MP5110U/DPX-MP4110/DPX-MP3110 Sound Enhancer Control Adjusts each function of Sound effect individually. 1 Enter the Sound Effect Control mode Press the [SE] button for at least 1 second. “SE CTRL” is displayed. 2 Select the Sound effect item for adjustment Push the Control knob towards right or left. 3 Adjust the Sound effect item Push the Control knob towards up or down. Adjustment Item Display Range Bass setting “Bas” Off/Low/High LV setting “LV” Off/Low/High 4 Exit the Sound Effect Control mode Press the [SE] button. . • Bass: Assisting the playback for the super bass sound. • LV: Adjusts the sound image by changing the vertical position of the speakers virtually and increases or decreases the soundscape. Spectrum Analyzer Select Selecting the Spectrum Analyzer display. Spectrum Analyzer Display Scan of Spectrum Analyzer “S.A Scan“ Peak Hold “PeakHold“ Spectrum Analyzer 1 “Flash“ Spectrum Analyzer 2 “Meter“ Spectrum Analyzer 3 “Gravity“ Spectrum Analyzer 4 “Tension“ Spectrum Analyzer 5 “Hana-Bi“ Spectrum Analyzer 6 “Laser” Spectrum Analyzer 7 “Dance“ Spectrum Analyzer 8 “Warp“ Spectrum Analyzer 9 “Jump“ Spectrum Analyzer off “S.A Off“ 1 Enter the Spectrum Analyzer Select mode Press the [COL] button for at least 1 second. “SPEANA” is displayed. 2 Select the Spectrum Analyzer Turn the Control knob. 3 Exit the Spectrum Analyzer Select mode Press the [COL] button. . • Scan of Spectrum Analyzer: The items from “PeakHold” to “Jump” are displayed in sequence. Illumination Color Select Select the illumination color for display, buttons and control knob. 1 Enter the Illumination color Select mode Press the [COL] button. “Color” is displayed. 2 Select the setting item Push the Control knob towards right or left. Display Setting item “All” Sets the same color for all of items. “Display” Sets the display color. “Key” Sets the button color. “Rotary” Sets the control knob color. 3 Change the color Turn the Control knob. Color setting Display … Scan of Color 1-10 ”V.Scan” Color 1 ”Color 1” … Color 2 ”Color 2” Color 10 ”Color 10” User color ”User” 4 Exit the Illumination color Select mode Press the [COL] button. . • You can adjust the illumination color to your taste using RGB setting. See (page10) for detail. • When illumination effect (I-EFCT) setting (page 14) is “2“, you can not set color. • When illumination effect (I-EFCT) setting (page 14) is “3“, you can select “ALL“ and set “color1” to “10”. English | 9 General Operation User Color Setting Adjust the illumination color with R(Red), G(Green), B(Blue) setting. Adjusted set value is memorized in the of User setting area. 1 Select the item to adjust and select “USER” See step1 to step3 of (page 9) for detail. 2 Enter the RGB adjusting mode Press the Control knob for at least 1 second. 3 Select the color to adjust Push the Control knob towards right or left. Adjust the blinking color. 4 Adjust the RGB Color Turn t...Otros modelos de este manual:Unidad - DPX-MP3110 (493.33 kb)Unidad - DPX-MP4110 (493.33 kb)
)
