Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
[0 to 8] 4 Press number button 1 ( ) to move to another setting level. 4 /. : select the quality of LPF. [–12dB/oct or –24dB/oct] Control dial: Turn the control dial to select the subwoofer phase. [0deg (normal) or 180deg (reverse)] * If “Off” is selected in step 2, you can only adjust the subwoofer phase. C Hi Pass (Hi Pass Filter) Turn the control dial to select the cutoff frequency to the front/rear speakers. Set this to match the LPF setting. • Off: All signals are sent to the front/rear speakers. • 62Hz: Frequencies lower than 62 Hz are cut off. • 95Hz: Frequencies lower than 95 Hz are cut off. • 135Hz: Frequencies lower than 135 Hz are cut off. D VolAdjust, [–5 to +5] Turn the control dial to adjust the input level of each source (except FM). Adjust to match the input level of the FM sound level. • Before making an adjustment, select the source you want to adjust. E Loudness, [Off or On] Turn the control dial to select “Off” or “On”. When “On” is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level. 4 Exit from the setting. Storing your own sound modes You can adjust the sound modes and store your own adjustments in memory. • When is shown on the display, you can move back to the previous screen by pressing number button 6. 1 2 Select a sound mode. 3 Select a frequency range to adjust. 4 Adjust the sound elements of the selected frequency range. 1 Press 4 /. to select the frequency band, then press 5/ .to enhanced level for the selected frequency band. [–6 to +6] 2 Press number button 5 ( ), then turn the control dial to select the frequency. 3 Press number button 5 ( ), then turn the control dial to select the quality slope (Q). 5 Repeat steps 3 and 4 to adjust the other frequency bands. 6 Store the adjustments. 32 | KDV-MP6339U/KDV-MP6439U General settings — PSM You can change PSM (Preferred Setting Mode) items 4 Adjust the selected PSM item. listed in the table below and on pages 34 and 35. 1 Enter the PSM settings. 2 Select a PSM category. 5 Repeat steps 2 – 4 to adjust other PSM items if necessary. 6 Finish the procedure. To display the rest 3 Select a PSM item. By pressing either one of the buttons repeatedly, you can also move to the item of the other categories. Category MOV (movie) Indication Demo Display demonstration Item ( : Initial) • On • Off Setting, [reference page] : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. : Cancels. LevelMeter Audio level meter Clock Disp*1 Clock display • Meter 1 • Meter 2 • On • Off : Select the different level meter patterns. • Press DISP to show the selected level meter. : Clock time is shown on the display when the power is turned off. : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [7]. CLOCK *1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “Off” to save the car’s battery. Continued on the next page English | 33 Category CLOCK Indication Clock Hr Hour adjustment Clock Min Minute adjustment 24H/12H Time display mode Item ( : Initial) 1 – 12AM/ 1 – 12PM (0 – 23) 00 – 59 • 12Hours • 24Hours Setting, [reference page] : Initial: 1 (1:00AM), [7]. : Initial: 00 (1:00AM), [7]. : See also page 7 for setting. DISP (display) Scroll*2 Scroll Dimmer Dimmer From – To*3 Contrast Contrast LCD Type Display type Tag Tag display NTSC/PAL*5 Video format • Once • Auto • Off • Auto • Off • On • Time Set — 1 – 8 Initial: 5 • Auto • Positive • Negative • On • Off • PAL • NTSC : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. (Holding DISP can scroll the display regardless of the setting.) : Dims the display when you turn on the headlights. : Cancels. : Dims the display and button illumination. : Set the timer for dimmer, [36]. Any hour – Any hour : Initial: 6PM – 7AM. : Adjust the display contrast to make the display indications clear and legible. : Positive pattern will be selected during the day time*4; while negative pattern will be used during the night time*4. : Positive pattern of the display. : Negative pattern of the display. : Shows the tag while playing MP3/WMA/WAV tracks. : Cancels. : Select this if your monitor is of the PAL color system. : Select this if your monitor is of the NTSC color system. *2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *3 Adjustable only when “Dimmer” is set to “Time Set”. *4 Depends on the “Dimmer” setting. *5 The newly selected video format takes effect only after you turn on the power again or change the source. 34 | KDV-MP6339U/KDV-MP6439U Category AUDIO TUNER Indication IF Band Intermediate frequency band AudioBooks*6 Speed control of “Audiobook” Amp Gain Amplifier gain control Rear Spk*7 Item ( : Initial) • Auto • Wide • Normal • Faster • Slower • High PWR • Low PWR • On Setting, [reference page] : Increases the tuner sel...
Otros modelos de este manual:Unidad - KDV-MP6339U (3.17 mb)