Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Kenwood Tamaño del archivo: 524.59 kb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Unidad - KRC-279RA (348.03 kb)

3 Changing setting for currently displayed function Press either the 4 or . button. The setting will change for each function. Example: The setting of the touch sensor tone will switch from on to off, and "BEEP OFF" is displayed. 4 Ending the menu mode Press the MENU button. NOTE Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function and the Alarm function. — 20 — Touch Sensor This function produces operation. It can be Display and setting: "BEEP ON" : Beep setting is "BEEP OFF" : Beep setting is off. NOTE The beep sound is not output from the Manual Time Adjustment Adjust the time manually. NOTE This adjustment is available only when the automatic time adjustment is set to off. Display and setting: 1 Select the display "CLK ADJ" during the selecting function in the menu system. 2 Hold down either the 4 or . button for two seconds or more to enter the Manual time adjustment mode. The time display will blink. 3 • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the . button to advance the minutes, or press the 4 button to make the minutes go back. set the time manually is turned off. The Display and setting: "SYNC ON" : Automatic "SYNC OFF" : Manual time Adjusting Time Automatically: Tune into an RDS station for 3 or The time adjusts automatically to NOTE The time is not adjusted when the RDS not transmitting a time signal. Choose another such a case. Power OFF Timer Set the time for the OFF Timer function activated when selected Standby mode. If the predefined time elapses, this unit's power is automatically turned off. Display and setting: "OFF ___" :Power OFF Timer function is canceled. "OFF 20M" :Unit's power goes OFF after 20 minutes. "OFF 40M" :Unit's power goes OFF after 40 minutes. "OFF 60M" :Unit's power goes OFF after 60 minutes. NOTE The factory default is "OFF 20M" . Automatic Time Adjustment With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also — 21 — Menu settings Selecting Tuning English News Bulletin with PTY News You can choose from station seek, and manual. You can arrange to have listening source, including Display and setting: Bulletin function is on, the "AUTO 1" : Auto seek tuning you to set the interval during "AUTO 2" : Preset station seek cannot take place. You can adjust the PTY news "MANUAL" : Manual tuning mode period from 10 to 90 minutes for Display and setting: "NEWS OFF/ 00M/ 10M/ 20M/ 30M/ 40M/ 80M/ 90M" (M= minutes) : When you select the news interruption timeout News function turns on and the NEWS indicator When a news bulletin is received, "NEWS" will be and reception will begin at the preset volume. Auto Memory Entry You can automatically store all the receivable frequencies the band currently being listened to, and then recall the touch of a button later. This function is especially NOTE • If you choose the "20M" setting, further news bulletins will when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way. be received for 20 minutes once the first news bulletin is received. Display and setting: • This function is only available if the desired station sends PTY- code for news bulletin or belongs to -Network sending PTY-code for news bulletin. the menu system. • If you turn on the news bulletin function in the MW/LW band, 2 Hold down either the 4 or . button for two seconds or the band is switched automatically to the FM band. more to start auto memory function. However, the MW/LW band is not returned to when you turn off The numbers of the preset station buttons showed in order. the function. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. NOTE Local Seek Function With the local seek function turned on, auto seek tuning skips stations with relatively poor reception. Display and setting: "LO.S ON" : The local seek function is on. "LO.S OFF" : The local seek function is off. • When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3. • When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored. • When the Traffic Information function is on , only the local traffic information station frequency will be stored. — 22 — Cancelling Auto Memory Entry During Its Operation: Press the MENU place to stop the process. Recalling a Preset Station: Press the preset station button The number of the re...

Descargar ahora

Introduzca dos números de la imagen: