Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
You may damage the surface of the CD if you try pulling it down as it ejects. Do Not Use • Be sure to use round this unit and do not use CDs. Use of special shape the unit to malfunction. • Be sure to use CDs with disc mark only for this unit. • CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CDRW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs recorded on CD-R or CD-RW. Do Not Use Labeled Side Do not use the CD with stuck on it. Using such a CD may cause deformed and the sticker to resulting in malfunction of the — 7— General Power NOTE English KDC-416S Increasing Volume: Press the u button to turn up the volume. Turning on the power: Press the SRC (source) Turn the power on before carrying Turning off the power: Press the PWR OFF button for at SRC/ PWR OFF 4/ . u d ATT/ LOUD Q/AUD FM/ AMCLK/ ADJ #1 #3 LOUD indicator Release button Volume ATT indicator ATT indicator LOUD indicator ATT indicator LOUD indicator SYSTEM Q indicator SYSTEM Q indicator KDC-316S/37MR/316V/216S KDC-116S Clock indicator Clock indicator Clock display Clock display Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. SYSTEM Q indicator — 8— Switching Modes Loudness Switching Modes: Each time you press the switches as follows: Tuner mode CD mode External disc control mode 1(KDC-416S/316S/ External disc control mode 2 / AUX mode (KDC-416S/316S/37MR /316V only) Standby mode Selecting standby mode: Press the SRC button repeatedly and switch to "ALL OFF/When "ALL OFF/OFF" is displayed, the standby mode is activated. The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have the display illuminated but don't want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCAS210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDCCX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only). During the AUX mode, "AUX/AVin" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. This function amplifies turned down. The LOUD indicator lights on. Turning Loudness On/Off: Press the LOUD button for at least loudness on and off. Function of the KDC-316S/KDC-37MR/KDC-316V/ Clock display Changing the Clock Display: Press the CLK button to switch the clock display on and NOTE The clock indicator lights while the clock is displayed. — 9— General English System Q You can recall the of the music. Switching the Preset Sound Each time you press the Q switches as follows: Scan of Flat – Easy ("SCAN/SCAn" ) (Default setting) Easy ("EASY/SQ-6") Flat ("FLAT/SQ-1") Jazz ("JAZZ/SQ-5") Rock ("ROCK/SQ-2") Pops ("POPS/SQ-4") Top 40 ("TOP 40/SQ-3" ) As you proceed, each indicator would go on. NOTE The System Q function changes the values of the following sound quality parameters: Bass center frequency, bass level, bass quality factor, bass extend, middle center frequency, middle level, middle quality factor, treble center frequency, and treble level. Note that some of these parameters cannot be controlled by the audio control setting feature. Their setting values are different depending on the setting of the mobile preset plan mode. Audio Control Setting Adjust various parameters of sound quality. 1 Press the AUD button for at least one second to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM AM button reverses Bass Fader Middle Balance Treble NOTE Source tone memory Each source (CD, MD, FM, AM and disc memory in which to store the bass, middle, settings. The settings made for a particular source are recalled automatically whenever you use that source (for mode uses the tone settings made for FM, AM for . 3 Adjust each mode Press the 4/ . button. Look at the table to adjust the mode being displayed. Adjustment mode (Display) Operation of Audio control button 4 button . button Bass ("BAS") Bass decreased. Bass increased. Middle("MID") Middle decreased. Middle increased. Treble("TRE") Treble decrea...
Otros modelos de este manual:Unidad - KDC-216S (494.59 kb)
Unidad - KDC-316S (494.59 kb)
Unidad - KDC-316V (494.59 kb)
Unidad - KDC-37MR (494.59 kb)