Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Using a fuse with the wrong rating may cause your unit to malfunction. • To prevent a short circuit when replacing fuse, first disconnect the wiring • Do not place any object between faceplate and the unit. • Do not use your own screws. screws provided. If you screws, you could IMPORTANT INFORMATION About CD players/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. You can damage both your unit and the CD changer if you connect them incorrectly. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate the CD and damage the unit. — 3— English EnglishE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored. CLK ADJ AUTO AME SCANAUD RDM REP M.RDMOFF CRSC LOUD Reset button • Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations the display may represent something impossible in actual operation. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is danger of hazardous radiation outside unit. Cleaning the CD Slot As dust tends to accumulate in the CD slot, clean it every once in a while. Your CDs can get scratched if you put them in a dusty CD slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. — 4— About CDs About CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs CD accessories Don’t use disc CD cleaning Clean from the center of the disc and move outward. Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CDs with coloring on the recording surface or that are dirty can’t be used. • This unit can only play the CDs with . It may not correctly play discs which do have the mark. • A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization refer to your CD-R/CD-RW writing and your CD-R/CD-RW recorder manual.) — 5— CD storage • Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. General features General features English Release button (KDC-3026/KDC-2026/KDC-226 only) CLK ADJ AUTO AME SCANAUD RDM REP M.RDMOFF CRSC LOUD AM FM . 4 1 3 u d ATT/ Q/ SRC CLK/ LOUD AUD ADJ LOUD indicator SYSTEM Q indicator Clock display ATT indicator Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] but...
Otros modelos de este manual:Unidad - KDC-126 (373.23 kb)
Unidad - KDC-126S (373.23 kb)
Unidad - KDC-226 (373.23 kb)
Unidad - KDC-3026 (373.23 kb)