Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
The setting switches as follows. Off ("SP OFF") / For the OEM speaker ("SP OEM") / For 6/6x9 in. speaker ("SP 6/6x9") / For 5/4 in. speaker ("SP 5/4") 4 Press the Q button to end the mobile preset plan mode. NOTE When you change the type of speaker setting, the bass, middle and treble tone settings are returned to original levels. TEL Mute Shut down the audio system temporarily whenever an incoming call is received. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from original source is restored Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one returned to automatically, and the NOTE The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. — 9— English General features Audio Control Adjust various parameters 1 Hold down the AUD button the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the change as follows: Pressing the FM button advances the display, AM button reverses it. Bass Fader Middle Balance Treble NOTE Source tone memory Each source (CD, MD, FM, AM and disc changer) has its own memory in which to store the bass, middle and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Adjust each mode Press the 4/ . button. Look at the table to adjust the mode being displayed. Adjustment mode (Display) Operation of Audio 4 button . button Bass ("BAS") Bass decreased. Bass increased. Middle("MID") Middle decreased. Middle increased. Treble("TRE") Treble decreased. Treble increased. Balance("BAL") Left channel emphasized. Right channel emphasized. Fader ("FAD") Rear channel increased. Front channel increased. 4 Press the AUD button to end the control mode. NOTE Determining the parameters in the audio control setting all the adjustments made in the System Q and they are with the values made in the audio control setting. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Projections Grooves Removing Faceplate: The faceplate is unlocked, allowing you to detach it. NOTE Release button • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached. — 10 — Tuner features • Do not expose sunlight or excessive too much dust or the Reattaching Faceplate: 4/ . 1 Align the projections on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing SRC #1-6 Band display FM/ AMCLK Frequency Preset station number AUTO indicator ST indicator — 11 — Tuner features English Tuning 1 Press the SRC button obtained. "TUNER" is displayed selected. 2 Press either the FM or AM button Each time you press the FM button, between the FM1, FM2 and FM3. Press the AM button to select the MW 3 • Auto Seek Tuning Press the . button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies. • Preset station seek tuning Press the . button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the lowest number). NOTE If the frequencies stored at the preset numbers receive stations which were not originally memorized when travelling long distances, the preset number is not displayed. In such cases, pressing the 4/ . button to use preset station seek will receive channel 1. • Manual Tuning Press the . button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step. 1 Select the band/ 2 Hold down the button station, for two seconds The button number blinks the data has been stored. Recalling a Preset Station: Press the preset station button (#The number of the recalled station NOTE You can store 6 stations in each of the FM1, (MW and LW) bands. Clock display Changing the Clock display: Each time you press the CLK button, the display switches between the Programme Service name (during RDS station reception)/Station frequency and clock. NOTE • The ST indicator lights up when stereo broadcasts are being received. • Please see the menu settings about selecting tuning mode. (page 22) Station Preset Memory Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. — 12 — RDS features RDS (Radio #1-6 AMCLK PTY FM/ 4/ . TI/ TI VOL ADJ RDS is a digital information signals besides those network information being When listening to an RDS capability), the programme displayed along with the frequency, which station is being received. RDS (Radio Data System) stations for the...
Otros modelos de este manual:Unidad - KDC-305RA (588.59 kb)
Unidad - KDC-3090RA (588.59 kb)
Unidad - KDC-3090RG (588.59 kb)
Unidad - KDC-4090R (588.59 kb)