Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate: 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. Operation of the KDC-2018 Disabled System Indicator (DSI) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. The factory default for this function is ON. Turning Disabled System Indicator On/Off: 1 Turn the power of the unit off. 2 While pressing buttons #1 and #3 at the same time, press SRC button. Repeat steps 1 and 2 above to turn DSI back on. NOTE The KDC-4018/4018G has the equivalent For details, refer to the Disabled System menu settings.(page 20) KDC-1018 FM/ 4/ . CRSC AUTO/ MENU AME SRC AMCLK/ #1-6 KDC-4018/4018G Band display KDC-2018 ST indicator Preset station number FrequencyAUTO indicator ST indicator Band display Preset station number Frequency AUTO indicator CRSC indicator ST indicator Preset station number CRSC indicator Band display Frequency AUTO indicator — 11 — English English Tuning NOTE You can choose from three tuning modes: auto seek, preset station seek, and manual. The AUTO 1 indicator lights up when auto seek tuning is selected, and the AUTO 2 indicator lights when preset station seek tuning is selected. Selecting Tuning Mode: Press the AUTO button. Each time you press the AUTO button, the mode switches as follows. Ў Auto 1 (Auto Seek Tuning) Ў Auto 2 (Preset Station Seek Tuning) Ў Manual (Manual Tuning) Tuning: 1 Press the SRC (source) button repeatedly to select the tuner mode. "TUNER/TUnE" is displayed when the tuner mode has been selected. 2 Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3 (which are used of preset stations) . Press the AM button to select the AM band. 3 • Auto Seek Tuning Press the . button to seek higher frequencies. Press the 4 button to seek lower frequencies. • Preset station seek tuning Press the . button to move to the next preset the one with the next highest 4 button to move to the last preset station lowest number). • Manual Tuning Press the . button to increase the Press the 4 button to decrease The ST indicator lights up when stereo broadcasts are being received. Station Preset Memory Store the frequency of a station. You can then recall that station with a single touch of a button. 1 Select the band/station that you want to have stored. 2 Press the button (#1-6) that you want to use for the station, for at least two seconds. The button number blinks once in the display to indicate that the data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. NOTE You can store six stations in each of the FM1, FM2, FM3, AM bands. Auto Memory Entry You can automatically store all the receivable the band currently being listened to, the touch of a button later. This function when you are travelling and do available. Up to six frequencies 1 Select the band for auto memory 2 Press the AME button memory entry. The numbers of the When all the stations memory, the the last station — 12 — Recalling a Preset Station: Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. stored up to the point that you have entered, and the mode The number of the recalled station is displayed. ends. NOTE Function of the KDC-4018/KDC-4018G Station Name Preset (SNPS) You can assign names to radio stations with the Station Preset Memory. Up to 18 FM stations and 16 AM stations can be assigned names. 1 Adjust the frequency to the station whose name you want to enter. 2 Enter the menu mode Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered. 3 Press the FM or AM button to select the display "NAME SET" . 4 Press either the 4 or . button for at least two seconds to enter the station name preset mode. The cursor will blink in the position where letters are entered. 5 Press either the 4 or . button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the . button to the right. 6 Press the FM or AM button to display the Characters that can be displayed are as Alphabet : A ~ Z Numerals and symbols : 0~9 @ " ‘ ] 7 Continue steps 5 and 6 until all the name. • You can assign names to up to 18 FM stations and 16 AM stations. • All the station names will be erased if you press the Reset button. • If you want to change the name of a station, first display the name of the station (following steps 1 to 4 above), then change the letter(s) that you want by following steps 5 and 6. Frequency Step Setting Switch the frequency step used in seeks. The factory defaults are 50 kHz for FM and 9 kHz for AM. 1 Turn the power off. 2 Hold down buttons #1 and #5, then turn the power back The fr...
Otros modelos de este manual:Unidad - KDC-1018 (517.33 kb)
Unidad - KDC-2018 (517.33 kb)
Unidad - KDC-4018G (517.33 kb)