Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Use this mode when you want to have the display illuminated but do not want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • The AUX mode is available only when the changer / AUX switching adapter (KCA-S210A or CA-C1AX) or CD changer (KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected to this unit. During the AUX mode, "AUX" / AUX-name will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. NOTE Presetting AUX-name In the AUX mode, press the NAME.S button for two seconds or more. "NAME SET" is display and AUX-name mode is entered. Input the characters, referring to the section on "Presetting Disc Names (DNPS)" (page22). This function amplifies turned down. The LOUD indicator lights on. Turning Loudness On/Off: Hold down the LOUD button for the loudness on and off. Audio Control Setting Adjust various parameters of sound quality. 1 Press the AUD button to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. NOTE Source tone memory Each source (tape, CD, MD, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Adjust each mode Press the 4/ . button. Please refer to the following for the adjusting values. 4 Press the AUD button to end the control mode. "Kex"/"ec"/"dB" : Recalling the kenwood preset sound setting Press the preset buttons (#1-6). Settings: #1;Flat, #2;Rock, #3;Pops/Top40, #4;Jazz, #5;Easy, #6;Scan of #1-5 — 8— NOTE • This mode is available is on. (page29) • You can call the following centre frequency, bass level, extension, treble centre frequency, Their setting values are different the mobile preset plan mode. "Bass"/"BAS" : Adjust the bass level. Setting values: - 8 – + 8 "Treble"/"TRE" : Adjust the treble level. Setting values: - 8 – + 8 "Balance"/"BAL" : Adjust the balance level. Setting values: Left 15 – Right 15 1 Press the SRC button "ALL OFF" is displayed 2 Press the AUD button 3 Press either the 4 or . button to select the type speaker. The setting switches Off / For the OEM speaker / For For 5/4 in. speaker 4 Press the AUD button to end the mobile NOTE • When you change the setting of type of speaker, treble tone settings are returned to original levels. • This mode is available only when the Sound coordinate is on. (page29) TEL Mute Shut down the audio system temporarily whenever an incoming call is received. NOTE "Fader"/"FAD" : Adjust the fader level. Setting values: Front 15 – Rear 15 "V OFFSET/VOS" : Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Setting values: - 8 – ± 0 Mobile Preset This function allows you to adjust the setting that is recalled with the sound coordinate system, according to types of speakers. The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from the display, and the volume of the original source is restored gradually. Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually. — 9— English General features Theft Deterrent The faceplate can detached form the unit, Removing the Faceplate: 1 • When the control panel is visible Press the release button. • When the control panel has been Press the upper side of the faceplate. 2 Holding the centre part of the faceplate, 3 Push back the bottom of the faceplate bracket until it locks. 2 CAUTION 2 CAUTION Do not set the right side of the faceplate first, when reattaching the faceplate. connector on the faceplate bracket to malfunction. 2 Press the right side of the faceplate until it Hiding the control panel: 1 Press the release button and slide open the faceplate. 2 Push upward the back of the control panel and reverse panel. • Do not apply excessive force to the faceplate bracket without attaching the faceplate. Doing so will cause the faceplate bracket to be deformed. • Do not touch the connector on the faceplate bracket after removing the faceplate. Touching the connector may cause damage to the unit. • Do not touch two metal parts on both sides of the faceplate bracket. Touching those parts may injure you. NOTE • The faceplate is a precision piece o...
Otros modelos de este manual:Unidad - KDC-6080R (480.53 kb)
Unidad - KDC-6080RV (480.53 kb)