Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Kenwood Tamaño del archivo: 1.58 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Unidad - KDC-7021SE (1.6 mb)

Unidad - KDC-7021SE (1.6 mb)

The frequency for the RDS station will be displayed for seconds instead of the station name. In CD & External disc source Information Display Track Time Disc name "DNPS" Disc title (In External disc source) "D-TITLE" Track title (In External disc source) "T-TITLE" Switching Clock Display Switching the displayed information. Press the [CLK] button. Each time the button is pressed it switches between clock display and current source. During clock display the clock indicator is ON. Selecting the display input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display. 2 Enter Auxiliary input display setting Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is displayed. 3 Select the Auxiliary input display Press the [ 4] or [ . ] button. Each time the button is pressed it switches through displays. • "AUX" • "TV" • "VCP" • "GAME" • "PORTABLE" 4 Exit Auxiliary input display setting mode Press the [DISP] button. When operation stops for 10 seconds, the name at that time is selected, and Auxiliary input display setting mode closes. Faceplate Angle Adjustment Press the [ANG] button for at least 1 second. Do not apply excessive force to the faceplate. It can cause damage. — 10 — Hiding the Control Hiding the Control The faceplate of the helping to deter theft. Removing the Faceplate 1 Turn the ignition OFF or press the second. The power turns OFF and the faceplate 2 Holding the center part of the faceplate When the faceplate is kept remove open, according to the (page 24) setting, the faceplate is hidden and The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Set the left side of the faceplate in the faceplate bracket. Prevents tampering etc. Hiding the control panel Press the [SRC] button for at The faceplate slides open. When the time set in (page 24) lapses, the faceplate is hidden and the power OFF. Showing the control panel Press the left part at the upper side of the The faceplate will open and show the control panel. TEL Mute The audio system automatically mutes when a call comes When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. — 11 — 2 Press the right side of the faceplate until it locks. English English Tuning SRC AM FM #1 – 6 4 / . MENU Band display Frequency display Preset station number ST indicator Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Direct Access Tuning (Function of remote) Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. The "– – – –" display. 3 Enter the frequency Press the number buttons on the remote. Example: Desired frequency Press button 92.1 MHz (FM) [#0], [#9], [#2], [#1] 810 kHz (AM) [#0], [#8], [#1], [#0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. — 12 — Station Preset Station Preset 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least The preset number display blinks 1 time. On each band, 1 station can be put in the memory — [#6] button. Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "Auto-Memory" display. 4 Open Auto Memory Entry Press the [ 4] or [ . ] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. • When the (page 26) is ON, only RDS stations are put in the memory. — 13 — • When Auto Memory stations preset in the Likewise, when it is done FM1 or FM2 aren't put in Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [#1] — [#6] button. RDS features RDS features English PTY AM FM TI/VOL ADJ DISP TI indicator Switching to traffic bulletin starts eve...

Descargar ahora

Introduzca dos números de la imagen: