Votos - , Puntuación media:
(
)
)
Fabricar: Kenwood
Tamaño del archivo: 587.92 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
• The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | ~ . (KDC-MP439/KDC-MP3039/KDC-MP339/KDCMP239) • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used • CDs that are not round cannot be used. • CDs with coloring on the recording surface or CDs that are dirty cannot be used. • This unit can only play the CDs with . This unit may not correctly play discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.) English | 3 Basic Operation Release Display Disc slot Control [..] Auxiliary input [VOL] knob [SRC] [1] [2] [3] [4] [5] [6] [AUTO] [B.BOOST] General functions Power/Source select button [SRC] Turns on the power. When the power is on, the source switches between Tuner (“TUNER”/ “TUnE”) , CD (“CD”) , Auxiliary input (“AUX”/ “AUH”), and Standby (“STANDBY”/ “STBy”) each time this button is pressed. Press at least 1 second to turn off the power. . • When an optional accessory is connected, the source name for each device appears (KDC-MP439 only). Volume control [VOL] Bass boost [B.BOOST] Switches between Boost 1 (“BB-L L1”/ “L1 BB-L”), Boost 2 (“BB-L L2”/ “L2 BB-L”), and Boost off (“BB-L OFF”/ “OFF BB-L”) each time this button is pressed. Faceplate release Release Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the faceplate. ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. Auxiliary input Auxiliary input Connect a portable audio device with mini-plug cable (3.5 o). . • Use the mini-plug cable which is stereo type and does not have any resistance. Muting volume upon reception of phone call When there is a call, “CALL” is displayed and the audio system is paused. When the call ends, “CALL” disappears and the audio system comes back on. The audio system comes back on when [SRC] is pressed during a call. Subwoofer output Control knob Switches between ON (“SW ON”/ “On SUB”) and OFF (“SW OFF”/ “OFF SUB”) each time the bottom side is pressed for at least 2 seconds. Clock display (KDC-139) Control knob Switches between ON and OFF each time the center is pressed at least 1 second. 4 | KDC-MP439/KDC-MP3039/KDC-MP339/KDC-MP239/KDC-139 : Indicates the button etc. to operate. Tuner functions Band select Control knob Switches between FM1, FM2, and FM3 each time the top side is pressed. Switches to AM when the bottom side is pressed. Tuning Control knob Changes the frequency when the left or right side is pressed. . • During reception of stereo stations the “ST” indicator is ON. Tuning mode select [AUTO] Switches as follows each time this button is pressed. Tuning mode Display Operation Auto seek “AUTO 1” Automatic search for a station. Preset station seek “AUTO 2” Search in order of the stations in the Preset memory. Manual “MANUAL”/ Normal manual tuning control. ”MAnU” Preset memory [1] - [6] Memorize the station selected when pressing for at least 2 seconds. Auto memory entry [AUTO] Memorizes six stations with good reception automatically when pressed for at least 2 seconds. Preset tuning [1] - [6] Recalls the memorized station. Disc play functions Disc play Disc slot Starts playing when a disc is inserted. When a CD is inserted, the “IN” indicator is ON. . • 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. • Refer to
Unidad - KDC-139 (587.92 kb)
Unidad - KDC-MP239 (587.92 kb)
Unidad - KDC-MP3039 (587.92 kb)
Unidad - KDC-MP439 (587.92 kb)