Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
— 11 — General General Station/Disc Attaching a title to 1 Receive/play the station/ A title can't be attached to a MD. 2 Enter Menu mode Press the [MENU] button for at least "MENU" is displayed. 3 Select Name set mode Press the [FM] or [AM] button. Select the "NAME SET" display. 4 Enter Name set mode Press the [ 4] or [ . ] button for at least 2 seconds. 5 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 6 Select the character type Press the [AUTO] button. Each time the button is pressed the character typed switches as shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 7 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote with a numbers buttons. Example:If "DANCE" is entered. Character Button Times pressed "D" [3] 1 "A" [2] 1 "N" [6] 2 "C" [2] 3 "E" [3] 2 8 Repeat steps 5 through 7 and enter 9 Exit Name Set mode Press the [MENU] button. • When operation stops for 10 seconds the name at registered, and Name Set mode closes. • Memory numbers - FM: 32 stations - AM: 16 stations - Internal CD player: 30 discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. — 12 — Tuner features Tuner features 1 Align the projections faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to AME AM FM SRC . 4 1 - 6 AUTO/ Band display Frequency display Preset station number ST indicator AUTO indicator — 13 — English English Tuning Mode Direct Access (Function Choose the tuning Press the [AUTO] button. Each time the button is pressed mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2" Search in order of the stations seek indicator in the Preset memory. Manual "Manual" Normal manual tuning control. Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Entering the frequency 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote. Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. — 14 — Auto Memory Auto Memory Putting stations with automatically. 1 Select the band for Auto Memory Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least When 6 stations that can be received are Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the desired [1] — [6] button. Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [1] and [5] button, press the Reset button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. • When the same operation is repeated, it returns to the original setting. • When the frequency step is switched, the frequencies in the memory are deleted. The TV channel of (optional accessory) can be selected. The action depends on the Television. Refer to the user for details. 1 Select TV source Press the [SRC] button. Select the "TV" display. 2 Select the TV band and Video input Press the [FM] button. Each time the [FM] button is pressed TV bands and input switch. 3 Select the TV channel Press the [ 4] or [ . ] button. Preset TV Tuning (Function of LX BUS Television) Callin...
Otros modelos de este manual:Unidad - KDC-MP4023G (637.17 kb)