Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario Kenwood, modelo KDC-MP4029

Fabricar: Kenwood
Tamaño del archivo: 723.79 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


• When the Security Code function is activated, it can’t be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "SECURITY" is displayed. 3 Enter Security Code mode Press the Control knob for at least 2 seconds. When "ENTER" is displayed, "CODE" is displayed. 4 Select the digits to enter Push the Control knob to [4] or [.]. 5 Select the Security Code numbers Push the Control knob to [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed. The Security Code function activates. • If you enter a Code different from your Security Code, you have to start over from step 4. Press the Reset button and when it’s removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed. The unit can be used. • If an incorrect code is input, "WAITING" is displayed, and the input prohibited time shown below is generated. After the input prohibited time lapses, "CODE" is displayed, and input can be done. Number of times the incorrect code was input Input prohibited time 1 — 2 5 minutes 3 1 hour 4 24 hours In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display Setting "BEEP ON" Beep is heard. "BEEP OFF" Beep canceled. In Standby mode Manual Clock Adjustment • This adjustment can be done when the (page 23) is set as OFF (KDC-3029R). 1 Select Clock Adjustment mode Push the Control knob to [FM] or [AM]. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 2 seconds. The clock display blinks. 3 Adjust the hours Push the Control knob to [FM] or [AM]. Adjust the minutes Push the Control knob to [4] or [.]. English | 23 Function of the KDC-3029R In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit’s clock. Display Setting "SYNC ON" Synchronizes the time. "SYNC OFF" Adjust the time manually. • It takes 3 to 4 minutes to synchronize the clock. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display Setting "DSI ON" LED flashes. "DSI OFF" LED OFF. Function of the KDC-3029R News Bulletin with Timeout Setting It switches automatically when a news bulletin starts even if the radio isn’t being listened to. Also, the time interval when interrupt is prohibited can be set. Display and Setting "NEWS OFF" "NEWS 00M" … "NEWS 90M" When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin Interrupt function is ON. When it’s ON, the "NEWS " is displayed. When the news bulletin starts, "NEWS " is displayed, and it switches to the news bulletin. • If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. • The news bulletin volume is the same level that was set for (page 15). • This function is only available if the desired station sends PTY-code for news bulletin or belongs to -Network sending PTYcode for news bulletin. • When the News Bulletin Interrupt function is ON, it switches to an FM station. Function of the KDC-3029R In Tuner mode Local Seek Only stations whose reception is good are searched for in auto seek tuning. Display Setting "LO.S OFF" The local seek function is OFF. "LO.S ON" The local seek function is ON. Function of the KDC-3029R In Tuner mode Tuning Mode Sets the tuning mode. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control. 4 Exit Clock adjustment mode Press the Control knob. 24 | English Menu system Function of the KDC-3029R AF (Alternative Frequency) When poor reception is experienced, automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting "AF ON" The AF function is ON. "AF OFF" The AF function is OFF. When the AF function is ON, the "RDS" indicator is ON. • When no other stations with stronger reception are available for the same program in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn OFF the AF function in such a case. Function of the KDC-3029R Restricting RDS Region (Region Restrict Function) You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. Display Setting "REG ON" The Region Restrict Func...

Otros modelos de este manual:
Unidad - KDC-2029 (723.79 kb)
Unidad - KDC-3029 (723.79 kb)
Unidad - KDC-3029R (723.79 kb)
Unidad - KDC-MP3029 (723.79 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría