Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
• Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from . to .. CD (..) ....: F Folder : AAudio file .... ..... ... ... ..... ..... ... ..... ... ..... ..... An online manual about audio files is put on the site, On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. . • In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals. • The word "iPod" appearing in this manual indicates the iPod connected with the iPod connection cable (optional accessory). The iPod connected with the iPod connection cable can be controlled from this unit. iPods that can be connected with the iPod connection cable are the iPod nano, Fifth Generation iPod, iPod classic, and iPod touch. Other iPods cannot be connected. About USB device • If you start playback after connecting the iPod, the music that has been played by the iPod is played first. In this case, "RESUMING" is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, “KENWOOD” or “.” is displayed on the iPod to indicate that you cannot operate the iPod. • When the USB device is connected to this unit, it can be charged up provided that this unit is powered. • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • You cannot connect a USB device via a USB hub and Multi Card Reader. • Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. • No USB device comes with this unit. You need to purchase a commercially available USB device. • When connecting the USB device, usage of the CAU1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. English | 13 Appendix Menu Glossary • SWPRE (Switching Preout) Switches the preout between rear output (“REAR”) and subwoofer output (“SUB-W”). • SUPREME Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • CD READ Sets the method for reading CD. When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. • AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. • ZONE2 (Dual Zone) Set the destination (front speaker “FRONT” or rear speaker “REAR”) of the sub source (AUX IN) when the Dual Zone function is turned on. • DISPLAY If this unit is not operated at least 5 seconds with “OFF” selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse. For operating KCA-BT100 To control KCA-BT100, operate as follows; To make setting for
Unidad - KDC-MP4039 (351.1 kb)
Unidad - KDC-MP5039U (351.1 kb)