Votos - 4, Puntuación media: 3.3 ( )

Fabricar: Kenwood Tamaño del archivo: 572.03 kb Nombre del archivo: Idioma del manual:

Keeping pressing the [DISP] button scrolls the display. Auxiliary input Portable audio device can be connected with the stereo mini-plug (3.5 mm o). 4 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Playing Music (CD/USB/iPod) Playing Disc Insert a disc into the disc slot. When inserted, the source is switched automatically and a song starts playing. Playing USB device Connect a USB device or iPod to the USB terminal. When connected, the source is switched automatically and a song is starts playing. Folder select Pressing the [BAND] button switches a folder. The iPod can be operated only when a category has been selected in the search mode. Song select Pressing the [4] or [.] button selects a song (track or file). Fast reverses or forwards the music while pressing the [4] or [.] button. (No sound is output while playing audio file.) Pauses and play Pressing the [6] button pauses or resumes playing a song (track or file). Removing Disc and USB device Pressing the [0] button ejects a disc. Keeping pressing for at least 2 seconds can be entered to the USB Remove mode (“USB REMOVE” is displayed.) and the USB device can be removed safely. . • CA-U1EX (optional accessory) is required to connect a USB device. CA-U1EX Listening Radio Select Tuner source Pressing the [SRC] button several times switches the source to “TUNER”. Band select Pressing the [BAND] button switches the receiving band (FM1, FM2, FM3, MW, SW1, SW2). Station select Pressing the [4] or [.] button selects the station. Station memory Pressing the [1] – [6] button recalls the memorized station. Keeping pressing the [1] – [6] button for at least 2 seconds memorizes the station currently selected. . • Details of the station selecting in operation are set in the “SEEK MODE” of (page 8). • Receivable stations can be automatically memorized. See “AUTO MEMORY” of (page 8). • Up to 6 each stations can be memorized to the [1] – [6] button in each band (FM1, FM2, FM3, MW, SW1, SW2). • Up to 6 stations with a different band (FM/AM) can be memorized to the [1] – [6] button according to the setting of “PRESET TYPE” of (page 8). • KCA-iP101 (optional accessory) is required to connect an iPod. • For the playable audio files, devices, iPod, see (page 17). English | 5 General Removing the Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the Faceplate Refer to the following diagram when reattaching the faceplate. ¤ • After pressing the Release button, detach the faceplate immediately. If the faceplate is left attached, it can fall due to vibration and so on. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. (KDC-U446/ KDC-U346/ KDC-U3046 only) • Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Muting Volume upon Reception of Phone Call The audio system automatically mutes when a call comes in. When a call comes in “CALL” is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The “CALL” display disappears and the audio system comes back ON. When the call ends Hang up the phone. The “CALL” display disappears and the audio system comes back ON. . • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 20). 6 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Display Indicator KDC-U346/ KDC-U4046/ KDC-U3046 ..v u KDC-U446/ KDC-U5046 ..q ......u 1 “ATT“ indicator: Blinks when the attenuator function is on. Use the remote control to turn on/off the attenuator function (page 16). 2 “ST“ indicator: Lights when a stereo broadcast is received. 3 “EQ“ indicator: Lights when System Q (page 9) is set to an EQ mode other than “NATURAL”. 4 “B.BOOST“ indicator: Lights when Bass Boost (page 9) is set to “1” or “2”. 5 “ “ indicator: Lights in the Search mode or when a Playlist is displayed. 6 “IN“ indicator: Lights when a disc is in the unit. 7 “ “ indicator: Shows the image indicating the operating state of each source or the setting of Audio Control. Text Display Selection Changing displayed information on each source following; In Tuner source Frequency “FREQUENCY” Clock “CLOCK” Information Display In CD source Disc title “DISC TITLE” Track title “TRACK TITLE” Play time & Track number “P-TIME” Clock “CLOCK” In Audio file/ iPod source Information Display Information Display Music title & Artist name “TITLE”/ “TITLE/ARTIST” Album name & Artist name “ALBUM”/ “ALBUM/ARTIST” Folder name “FOLDER NAME” File name “FILE NAME” Play time & Music number “P-TIME” Clock “CLOCK” In Standby/ Auxiliary input source S...

Descargar ahora

Introduzca dos números de la imagen: