Refer to (page 16). Also, you can recall it by selecting "Recall". Refer to (page 16). • * You can control this item when Speaker Select Rear of (page 13) is set to any item other than "None". 5 Adjust the Equalizer control item System Q Setting (Sound Type) Push the Control knob towards [4] or [.]. Each time you push the knob, the setting alternates between the settings shown in the table below. Sound setting Display User memory "User" Natural "Natural" Rock "Rock" Pops "Pops" Easy "Easy" Top 40 "Top40" Jazz "Jazz" • User memory: The values set on the . • Change each setting value with the (page 13). First, select the speaker type with the Speaker setting. Equalizer Front Setting/ Equalizer Rear Setting 1 Select a frequency band you wish to adjust. Press the Control knob. Each time you press the knob, the band alternates between "Band 1" and "Band 4". 2 Select the items to adjust for Equalizer. Push the Control knob towards [FM] or [AM]. Each time you push the knob, the item to be adjusted alternates between the items shown in the table below. 1 2 Equalizer Control Item "Band1"/ "Band2"/ "Band3"/ "Band4" "FREQ" Equalizer Frequency "Level" Equalizer Level "Q Factor" Equalizer Quality 3 Adjust the Equalizer. Push the Control knob towards [4] or [.]. Each time you push the knob, the setting alternates between the settings shown in the table below. Equarizer adjustment item Range Equalizer Front Frequency/ Equalizer Rear Frequency Refer to the followings. Equalizer Front Level/ Equalizer Rear Level –9 — +9 Equalizer Front Quality/ Equalizer Rear Quality 0.25/ 0.50/ 1.00/ 2.00 • The frequency which can be selected by each Frequency band is shown below. Band Frequency Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz) Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k (Hz) Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz) Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz) WOW Control Item Range • To get the best sound, first set the Cabin Setting and Speaker Select Front/Rear parameters using the (page 13). 6 Exit Equalizer Control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. WOW Control 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "SRS WOW" appears. Refer to (page 9). 3 Enter WOW Control mode Turn the [VOL] knob to select "SRS WOW". Press the [VOL] knob. • When "2ZONE" of
)
Iniciar sesión: