Manual de usuario Kenwood, modelo KDC-Z737
1 Enter Standby Press the [SRC] button. Select the "ALL OFF" 2 Enter Speaker Setting Press the [Q] "Speaker Setting" 3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting switches as shown below. Speaker type Display OFF "OFF" For 5 & 4 in. speaker "5/4 inch" For 6 & 6x9 in. speaker "6* 9/6 inch" For the OEM speaker "O.E.M." 4 Exit Speaker Setting mode Press the [Q] button. Function of the KDC-Z838 Speaker & Woofer Setting Fine-tuning so that the System Q value is optimal when the speaker and woofer type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker & Woofer Setting mode Press the [Q] button. "Speaker Setting" is displayed. 3 Select the Setting mode Press the [FM] or [AM] button. Each time the button is pressed setting mode and Woofer setting mode. 4 Select the Speaker type Press the [ 4] or [ . ] button. Each time the below. — 10 — In Speaker setting mode In Speaker setting mode Display OFF "OFF" For 5 & 4 in. speaker "5/4 inch" For 6 & 6x9 in. speaker "6*9/6 inch" For the OEM speaker "O.E.M." In Woofer setting mode Woofer type Display OFF "Woofer OFF" 12 in. A type "12in typeA" 10 in. A type "10in typeA" 12 in. B type "12in typeB" 10 in. B type "10in typeB" 12 in. C type "12in typeC" 10 in. C type "10in typeC" 8 in. type "8inch" 12 in. D type "12in typeD" 10 in. D type "10in typeD" 5 Exit Speaker & Woofer Setting mode Press the [Q] button. • The display of each part can be changed. - Switching Upper and Lower Part Display: (page 12) - Switching Full Screen Display: (page 11) • "Display Type C" can’t be selected in "ALL OFF". Switching Full Screen Display Switching the Full screen display. Press the [S.A] button. Each time the button is pressed the display switches as shown below. Information Demonstration Spectrum Analyzer 1 Spectrum Analyzer 2 Spectrum Analyzer 3 Spectrum Analyzer 4 Spectrum Analyzer 5 Full Screen display can be selected when "Display Type C" is selected in (page 11). Display Mode Switching Switching the display mode. Press the [DISP] button. Each time the button is pressed shown below. Display mode Display Upper and lower division "Display Type A" Type that mainly "Display Type B" Full screen display "Display Type C" — 11 — General features General features Switching the Standby Display Switching the information displayed in Standby. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Switch the display Press the [S.A] button. Each time the button is pressed the display switches as shown below. Information Display Demonstration Date & Clock Standby display "ALL OFF" • Demonstration can be selected when "Display Type A" is selected in (page 11). • Only "Display Type A" and "Display Type B" can be selected in "ALL OFF". Switching Upper and Lower Part Switching the upper and lower part display. 1 Select the Display Type Press the [DISP] button. 2 Enter Display Control mode Press the [S.A] button. "Display Control Mode On" 3 Switch the Upper Press the [FM] or Switch the Lower part display Press the [ 4] or [ . ] button. Each time the button is pressed the display switches. The Reference for the display content is after this operation's explanation. 4 Exit Display Control mode Press the [S.A] button. • The same information can't be displayed on the Upper part display and lower part display. • The Upper part display and Lower part display switching can be selected when "Display Type A" is selected in (page 11). • When "Display Type B" is selected the Lower part display content is clock ON or OFF. In Tuner source Upper Part Display Information Display Band display & Station name "Band+ch+SNPS" Band display & Frequency "Band+ch+FREQ" Lower Part Display Information Display Spectrum Analyzer & Graphic "S/ANA+GRAPHIC" Spectrum Analyzer & Clock "S/ANA+CLOCK" Spectrum Analyzer "S/ANA" Date "DATE" Clock & Graphic "CLOCK+GRAPHIC" For Disc name registration (SNPS/DNPS)> (page — 12 — In CD/ External disc source In CD/ External disc source Information Display Track Time "P-Time" Disc name "DNPS" Disc title "DISC-TITLE" Track title "TRACK-TITLE" Lower Part Display Information Display Spectrum Analyzer & Graphic "S/ANA+GRAPHIC" Spectrum Analyzer & Clock "S/ANA+CLOCK" Spectrum Analyzer "S/ANA" Track title "TRACK-TITLE" Disc title "DISC-TITLE" Disc name (CD player / CDchenger) "DNPS" Date "DATE" Clock & Graphic "CLOCK+GRAPHIC" For Disc name registration refer to (page 14). Function of the KDC-Z838 In MP3 source Upper Part Display Information Display Track Time "P-Time" Disc name "DNPS" Folder name "FOLDER NAME" File name "FILE NAME" Song title & Artist "TITLE/ARTIST" Album name "ALBUM/ARTIST" Lower Part Display Information Display Spectrum Analyzer & Graphic "S/ANA+GRAPHIC" Spectrum Analyzer & Clock "S/ANA+CLOCK" Spectrum Analyzer "S/ANA" Album name & Artist name "ALBUM/ARTIST" Song title & Art...
)
