Votos - 0, Puntuación media: 0
(
)
)
|
Fotos y especificaciones Philips CEM3200/51 |
Resumen del manual
e / • Select tuner band. • Select MP3/WMA folder. • Switch music listening zone. • Turn on or off full sound. • Enter iPod/iPhone control mode. English EN f • Eject disc. g • USB socket. h AUDIO IN • Connect external audio device. i ............ / • Press to turn on or off Maximizing volume. • In any mode, press and hold to view clock. j DBB/AS • Press to turn on or off Dynamic Bass Boost (DBB) sound. • In radio mode, press and hold to access to tuner auto store. k / • Start, pause, or resume the play of tracks. • In radio mode, press to select the preset radio station of No. 5/6. • In radio mode, press and hold to store the current radio station at channel No. 5/6. l / • In radio mode, press to select the preset radio station of No. 3/4. • In radio mode, press and hold to store the current radio station at channel No. 3/4. • For .wma and .mp3 tracks, press repeatedly to select shuffle play/repeat play. m / • In radio mode, press to select the preset radio station of No. 1/2. • In radio mode, press and hold to store the current radio station at channel No. 1/2. • For .wma and .mp3 tracks on a storage device, press to access the track/folder list. n DISP • Press to display current status. • Press to turn the dimmer on and off. o SOURCE • Select audio source. • Display LCD color. p EQ / AUDIO • Press to select equalizer (EQ) setting. • Press and hold access audio setting menu. q • Unlock the panel. r BAND • Select tuner band. s RESET • Restore default settings. t Disc slot EN Overview of the remote control abdcef a VOL +/- • Adjust volume. b / • Select tuner band. • Scroll up/down menu. • Select MP3/WMA folder. c / • Tune to a radio station • Skip track. • Fast backward/forward playback d SOURCE • Select audio source. e EQ • Select equalizer (EQ) settings. f OFF / / • Turn the unit on or off. • Mute or restore volume. 3 Get started Caution ••Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install the car audio These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer. Caution ••This unit is designed for negative ground (earth) 12 V DC operation only. ••Always install this unit in the car dashboard. Other locations can be dangerous as the rear of the unit heats up during use. ••To avoid short-circuit: before you connect, ensure that the ignition is off. ••Ensure that you connect the yellow and red power supply leads after all other leads are connected. ••Ensure that all loose leads are insulated with electrical tape. ••Ensure that the leads do not get caught under screws orin parts that will move (e.g. seat rail). ••Ensure that all ground (earth) leads are run to a common ground (earth) point. ••Use only the supplied mounting hardware for a safe and secure installation. ••Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional. English EN Note on the power supply lead (yellow) • When you connect other devices to this apparatus, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection • Never connect speaker wires to the metal body or chassis of the car. • Never connect speaker wires with stripes to one another. Connection: for cars with ISO connectors Caution ••Ensure that all loose leads are insulated with electrical tape. Note ••Consult a professional to connect CEM3200 as instructed below. 1 Connect the supplied male connector to the unit. 2 Check the car's wiring carefully and connect them to the the supplied male connector. Note ••Risk of danger! Please consult a professional to perform the below steps! 1 Green/black strip Left speaker (Rear) 2 White/black strip Left speaker (Front) 3 Gray/black strip Right speaker (Front) 4 Purple/black strip Right speaker (Rear) e Red Ignition key +12V DC when ON/ACC f Blue Motor/electric antenna relay control lead g Blue/white Amplifier relay control lead h Black Ground i Yellow To the +12V car battery which is energized at all times EN 3 Connect the antenna and amplifier as illustrated, if applicable. fghi ................................................ j Connector Connect to 1 ANTENNA Antenna 2 FRONT LINE OUT R (Socket) Front right speaker 3 FRONT LINE OUT L (Socket) Front left speaker 4 REAR LINE OUT R (Socket) Rear right speaker 5 REAR LINE OUT L (Socket) Rear left speaker 6 OE REMOTE (Purple) OE Remote 7 TEL MUTING (Blue) To cellular phone system 8 SUBWOOFER (Blue) Subwoofer 9 REAR AUX LINE OUT R Rear Aux right 10 REAR AUX LINE OUT L Rear Aux left Tip •...