Manual de usuario Pioneer, modelo DEH-2900MP
Otros manuales para este modelo:
Resumen del manual
Los colores de los cables de este producto se conforman con un nuevo código de colores. Dieses Produkt entspricht den neuen Kabelfarben. Le code de couleur des câbles utilisé pour ce produit est nouveau. Questo prodotto è conforme ai nuovi codici colori. De kleuren van de snoeren van dit toestel zijn gewijzigd. Данное устройство соответствует новым требованиям к цвету проводов. Printed in Thailand Imprimé en Thaïlande EW <06H00000> MANUEL D’INSTALLATK Installation Note: • Check all connections and systems before final installation. • Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. • Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. • Do not install this unit where: — it may interfere with operation of the vehicle. — it may cause injury to a passenger as a result of a sudden stop. • The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet. • Optimum performance is obtained when the unit is installed at an angle of less than 60°. DIN Front/Rear-mount_ This unit can be properly installed either from “Front” (conventional DIN Front-mount) or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following installation methods. DIN Front-mount 1. Insert the mounting sleeve into the dashboard. * When installing in a shallow space, use a supplied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve. 2. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. 3. Install the unit as illustrated. Removing the Unit 1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.) * It becomes easy to remove the trim ring if the front panel is released. 2. Insert the supplied extraction keys into both sides of the unit until they click into place. 3. Pull the unit out of the dashboard. Installation with the rubber bush ____J Mounting sleeve ENGLISH DIN Rear-mount_ 1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.) * It becomes easy to remove the trim ring if the front panel is released. 2. Determine the appropriate position where the holes on the bracket and the side of the unit match. 3. Tighten two screws on each side. * Use either truss screws (5 mm x 8 mm) or flush surface screws (5 mm x 9 mm), depending on the shape of screw holes in the bracket. Screw Fastening the front panel_ If you do not plan to detach the front panel, the front panel can be fastened with supplied screw. Screw Factory radio mounting bracket Instalación Nota: • Verifique todas las conexiones y sistemas ante...
Otros modelos de este manual:
Unidad - DEH-2900MPB (331.75 kb)
Unidad - DEH-2920MP (331.75 kb)
Unidad - DEH-3900MP (331.75 kb)
