Votos - 4, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Hyundai H-CMD2005 |
Resumen del manual
1). 2. Insert the 1 lithium battery, type CR2025 (3 V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control (pic.2). Pic. 1 Pic. 2 Warning: • Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. • Do not recharge, short, disassemble or heat the battery or dispose it in a fire. • Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. • When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a fire. 13 General operations Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel at first, and then press RESET button on the unit with a pointed object, (such as a ballpoint pen) to set the unit to initial state. Note: When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions. This function can only be operated by the head unit. Turning the Unit On/Off Press SOURCE button on the RC or SRC/PWR button on the unit to turn on the unit, press it again, the unit is still in the waiting status. After inserting a disc, the unit will automatically start playing. Keep pressing it more than 2 seconds to turn off the unit completely. Note: During playback mode, the unit will play automatically after inserting a disc. Setting the Sound Characteristics Repeatedly press SEL button on the RC or SEL/MENU button on the unit to select the desired mode in the following order: BALAN => FADE => BASS => TREBL => VOLUME. After selecting the desired mode, you can adjust the current level by pressing VOL buttons on the RC or on the unit. EQ Setting While listening to the popular music, classic music or rock music, you can select the corresponding preset modes to adjust the sound quality perfectly by using AF/EQ button on the RC or on the unit. Repeatedly keep pressing the button to choose the following modes in turn: POP => CLAS => ROCK => OFF. The default setting is OFF. 14 Volume Control Press VOL+/VOL- button on the RC or on the unit to increase/decrease the sound level. Turning Loudness On/Off Briefly press TA/LOUD button on the RC to activate loud function. You can press this button to increase the low frequency, which can improve sensitivity for your ears. Keep pressing it again to quit this function. Eject a Disc Press EJECT button on the RC or on the unit to eject or insert a disc. Open the Monitor Press REL button on the unit to slant the monitor, press and hold it again, the monitor will return to initial state. Angle Setting Press ANGLE+/- buttons on the unit to adjust the best position of the monitor. Mute Function Press MUTE button on the RC or on the unit to turn off the sound. The corresponding icon appears on the TFT. Press it again to resume the previous volume level. Night Mode Press and hold MUTE button to enter the night mode, press it again to switch to the normal mode. This function is operated by the head unit only. 15 Insert an SD Card Press REL button after turning the unit on, then insert an SD card into SD slot when the TFT is slanted, and the contents of the card will be played. Clear After inputting something wrong, press CLEAR button to clear it. Mode Selector Repeatedly press SOURCE button on the RC or the SRC/PWR button on the unit to select radio mode, TV mode or playback mode. Infrared Sensor Reception of the remote control signal. 16 Main menu Note: This unit can be operated by touching the screen buttons. Thus you can select the menus and change the parameters. When the unit is on, the monitor will display main menu. Press and hold SETUP button on the RC or SEL/MENU on the head unit, or press MENU on the monitor to enter the menu. This menu includes AUDIO, VIDEO, SOURCE, SYSTEM, EXIT. Press them on the monitor to set the desired status. Audio Adjust You can adjust VOLUME, BALANCE, FAD, BASS, TREBLE. For example, press FAD, the setting menu will appear. 17 Press |m] and m buttons to adjust the desired FAD level, press EXIT to exit this menu. Note: When adjusting the other options perform the same operation. Video Adjust In this menu you can adjust CONTRAST, COLOR, TINT, BRIGHT, PICTURE. Source Adjust You can adjust TV, CDC, GPS and AUX to ON or OFF, press the corresponding button to set. If one of them was set OFF, that function is not available. 18 CLOCK SYS KEY BEEP MONI FLEX 1 System Adjust In this menu you can adjust CLOCK SYS (clock system), KEY BEEP, MONI FLEX (monitor flex), REVER POLA (reverse polarity), SUBWOOFER, AMS FULLUP, LOCAL AREA, LOCAL, GOTO FREQ, RT SCROLL, TA VOLUME, REGION, ADJ SCREEN, CLOCK ADJ. Note: Press arrow buttons at the right side of the screen to...