Votos - 21, Puntuación media: 4.2
(
)
)
|
Resumen del manual
If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire. Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a fire. Inner panel Press the l±i button on the front panel to flip it down. On the inner panel there are the CD slot and RESET button. Press OPEN button on the front panel to release it. On the inner panel there are the SD card slot and LED indicator. 12 General operation Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the l±j button and then press RESET button under the panel to restore the unit to the original factory settings. Power button Press any button to turn on the unit. Long press POWER button to turn off the unit. Monitor tilt angle Press the TILT button to enter the monitor tilt angle adjustment mode. Press the !«/►►! buttons to select the position: 0 => 1 => 2 => 3 => 4 => 5 =>6. The monitor will flip down accordingly. Volume control Press VOL + button to increase the volume level. Press VOL - button to decrease the volume level. Turning the sound off When the power is on press the POWER/MUTE button on the panel or MUTE button on the RC to turn the sound off. Press it again to turn the sound on. 13 Setting the sound characteristics Press shortly and repeatedly the SEL button to select the audio setting: BASS => TREBLE => BALANCE => FADER => DSP. Press ▲/▼ buttons on the panel or on the RC to select the setting. Press ◄/► buttons to adjust the setting. Press SEL again to confirm and return to current mode. Notes: If turning off the power all the settings of each mode will be saved. • If turning off the ACC power all the settings will become as they were set on the plant as current. • If you don’t adjust setting within 3 seconds after selecting the desired setting, the unit will automatically return to the current mode. Setting other characteristics • During FM or DVD mode press and hold for 2 seconds the MENU button to enter the setting mode. • In Radio mode shortly and repeatedly press the OK button to select the setting: AUDIO => DUAL => RDS SETUP => EXPERT => TILT (pic.1). In DVD mode shortly and repeatedly press the OK button to select the setting: AUDIO => COLOR => PICTURE => SCREEN => DUAL => RDS SETUP => EXPERT => TILT (pic. 2). • Press ▲/▼ buttons on the panel or on the RC to select the setting. • Press ◄/► buttons to adjust the setting. • Press OK again to confirm, press MENU to return to settings list. MENU 1. AUDIO 5. DUAL 2. COLOR 6. RDS SETUP 3. PICTURE 7. EXPERT 4. SCREEN 8. TILT MENU 1. AUDIO 2. DUAL 3. RDS SETUP 4. EXPERT 5. TILT Pic. 1 AUDIO 1. BASS 2. TREBLE 3. BALANCE 4. FADER 5. DSP 14 Pic. 2 Mode setting Change playing mode in a sequence: RADIO, DISC (if there is a disc in unit), SD (if there is a SD card in unit), AUX IN mode. If you select RADIO mode, change radio band in sequence of: FM1, FM2, FM3, AM1, AM2. On-screen display (OSD) Press the OSD button to show the current mode information on the display. 15 Digital tuner_ Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press MODE button to select the RADIO mode. Press the BAND button to select the desired band: FM1, FM2, FM3, AM1, AM2. Manual/ automatic tuning • Manual tuning: press the I«/ buttons and hold for 2 seconds to enter the manual tuning mode. Press the I«/ buttons on the panel or on the RC repeatedly to select a station downward or upward step by step. Press and hold for 2 seconds the 1-6 preset buttons to store the station found. • Automatic tuning: press the I«/ buttons on the panel or on the RC repeatedly, the automatic search will start. It will play when finds the station. Press and hold for 2 seconds the 1-6 preset buttons to store the station found. Programming tuner stations You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically. • To store a station: - Select a band (if needed) - Select a station by I«/ buttons - Hold a Preset button (1-6) which you want store the station for at least 2 seconds. • To recall a station: - Select a band (if needed) - Press a Preset button (1-6) briefly to recall the stored station 16 Preset scan Press the RPT/P.SCN button on the RC to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again. AF (Alternative Frequencies) function When the radio signal strength is poor, enable or disable...
Otros modelos de este manual:reproductores de CD - H-CMD4006 (790.25 kb)