Votos - 5, Puntuación media: 5
(
)
)
|
Resumen del manual
This unit lets you enjoy a variety of features by using a rotary remote. In addition to the tape playback and the radio operation you can expand your system by connecting an optional CD/MD changer (XR-C353 only). EN 2 Table of contents This Unit Only Getting Started Resetting the unit................................................ 4 Detaching the front panel.................................. 4 Preparing the rotary remote.............................. 4 Setting the clock.................................................. 5 Cassette Player Listening to a tape............................................... 5 Playing a tape in various modes....................... 6 With Optional Equipment CD/MD Changer (XR-C353 only) Playing a CD/MD............................................. 10 Scanning the tracks — Intro scan.................................................. 11 Playing tracks repeatedly — Repeat play.............................................. 11 Playing tracks in random order — Shuffle play.............................................. 11 Radio Memorising stations automatically — Best Tuning Memory (BTM) ................... 7 Memorising only the desired stations.............. 7 Receiving the memorised stations.................... 7 Other Functions Using the rotary remote..................................... 8 Adjusting the sound characteristics................. 9 Muting the sound................................................ 9 Changing the sound and beep tone................. 9 Additional Information Precautions......................................................... 12 Maintenance....................................................... 13 Dismounting the unit....................................... 13 Location of controls.......................................... 14 Specifications..................................................... 15 Troubleshooting guide..................................... 16 Index................................................................... 18 3 Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ballpoint pen. c □ Reset button Note Pressing the reset button will erase all the memorised programme and memory functions. Detaching the front panel The front panel of this unit can be detached to prevent the unit from being stolen. 1 Press (Toff). 2 Press (release) to open up the front panel, and detach the panel by pulling it towards you. ' Be sure not to drop the panel when detaching it from the unit. • If you press (release) to detach the panel while the unit is still turned on, the power will automatically turn off to protect the speakers from being damaged. Attaching the front panel Attach part ® of the front panel to part ® of the unit as illustrated and push until it clicks. Notes • Make sure the front panel is the right way up when attaching it to the unit as it cannot be attached upside down. • Do not press the front panel hard against the unit when attaching it to the unit. It can easily be attached by pressing it lightly against the unit. • When you carry the front panel with you, put it in the supplied front panel case. • Do not press hard or give excessive pressure to the display windows of the front panel. • Do not expose the front panel to direct sunlight, heat sources such as hot air ducts or leave it in a humid place. Never leave it on the dashboard etc. of a car parked in direct sunlight where there may be a considerable rise in temperature inside the car. Caution alarm If you turn the ignition key to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch is set to the ® position). If you connect an optional power amplifier and do not use the built-in amplifier, the beep tone will be disabled. Preparing the rotary remote When you mount the rotary remote, attach the label in the illustration below. EN 4 Setting the clock The clock has a 24-hour digital indication. For example, setting it to 10:08 1 Press (off) or (dspl) during operation. 2 Press (dspl) for two seconds. Cassette Player The hour digit flashes. o Set the hour digits. To go forward To go backward \iii/ I00U '111*_ 2 Press (sel) momentarily. I 00 0 The minutes digits flashes. e Set the minute digits. To go forward To go backward /000 Ml i iv I 00 Listening to a tape Insert a cassette. Playback will start automatically. If a cassette is already inserted, press (SOURCE) repeatedly until "TAPE” is displayed. TAPE The side facing up is being played. TAPE The side facing down is being played. Tip To change the tape transport direction, press (mode) (*►) during tape playback. To Press 3 Press (dspl) momentarily. Stop playback (Off) Eject the cassette 6 The clock starts. Note If the POWE...
Otros modelos de este manual:Unidad - XR-C353 (742.17 kb)