Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
4 (at 4 ohms) General Outputs Audio outputs Power aerial relay control lead Tone controls Bass ±9 dB at 100 Hz Treble ±9 dB at 10 kHz Power requirements 12 V DC car battery (negative earth) Dimensions Approx. 178 . 50 . 176 mm (w/h/d) Mounting dimensions Approx. 182 . 53 . 161 mm (w/h/d) Mass Approx. 1.2 kg Supplied accessories Parts for installation and connections (1 set) Front panel case (1) Card remote commander RM-X115 (CDX-L470X) Optional accessory Card remote commander RM-X114 (CDX-L450X) Note This unit cannot be connected to a digital preamplifier or an equalizer. Design and specifications are subject to change without notice. Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General No sound. •Press the volume control + button to adjust the volume. •Cancel the ATT function. •Set the fader control to the centre position for a 2-speaker system. The contents of the memory have been erased. •The RESET button has been pressed. t Store again into the memory. •The power cord or battery has been disconnected. •The power connecting cord is not connected properly. No beep sound. • The beep sound is cancelled (page 13). • An optional power amplifier is connected and you are not using the built-in amplifier. Indications disappear from/do not appear in the display. •The clock display disappears if you press (OFF) for 2 seconds. t Press (OFF) again for 2 seconds to display the clock. •Remove the front panel and clean the connectors. See “Cleaning the connectors” (page 15) for details. Stored stations and correct time are erased. The fuse has blown. Makes noise when the ignition key is in the ON, ACC, or OFF position. The leads are not matched correctly with the car’s accessory power connector. No power is being supplied to the unit. •Check the connection. If everything is in order, check the fuse. •The car does not have an ACC position. t Press (SRC) (or insert a disc) to turn on the unit. The power is continuously supplied to the unit. The car does not have an ACC position. The power aerial does not extend. The power aerial does not have a relay box. CD playback A disc cannot be loaded. •Another CD is already loaded. •The CD is forcibly inserted upside down or in the wrong way. Playback does not begin. •Dirty or defective disc. •CD-R that is not finalized, or a CD-RW. •You tried to playback a CD-R not designed for audio use. •Some CD-Rs may not play due to its recording equipment or the di...
Otros modelos de este manual:Unidad - CDX-L470X (1.11 mb)