Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
E
E
N
N
G
Electrical Connections
G
L
L
I
I
S
S
CD changer input cord
H
Caution:
H
R (red)
Antenna
CD.C-IN
≥ This product is designed to operate with a 12 V
≥ Be sure to insulate any exposed wires from
51
L (white)
52
DC, negative ground battery system.
a possible short-circuit from the car chassis.
≥ To prevent damage to the unit, be sure to follow
Bundle all cables and keep cable terminals free
AUX input cord
R (red)
AUX-IN
the connection diagram below.
from touching any metal parts.
L (white)
≥ Remove approximately 1/4q (5 mm) of protective
≥ Remember, if your car has a drive computer or
covering from the ends of the leads before
a navigation computer, the data of its memory
Preout cord (front)
R (red)
connecting.
may be erased when the battery terminals are
CQ-C9800U
PRE-OUT FRONT
≥ Do not insert the power connector into the unit
disconnected.
L (white)
CQ-C9700U
until the wiring is completed.
Preout cord (rear)
R (red)
CD changer
PRE-OUT REAR
control
L (white)
Wiring Diagram
connector
Subwoofer cord
(red)
S.W-OUT
Monaural
Accessory used for wiring
(white)
DC/DC converter
No.
Item
Q’ty
≥ To ensure safety, ask a specialized contractor
Fuse (mini auto fuse type, 15 A)
6
Power connector
1
or the dealer from whom you purchased the
equipment to install the equipment for you.
≥ If the fuse (rear panel) blows frequently, they may be
≥ Anchor the converter securely using the
6 Power connector
something wrong with the unit or wiring connection.
Consult your nearest Panasonic Servicenter for service.
screws (option).
External amplifi er control power lead (max. 500 mA)
Note:
This lead is for connection to the power amplifi er.
(Blue/white stripe)
≥ Do not bundle or position the DC/DC converter, the speaker
Note:
output cords and the antenna near the preout cords. This is in
≥ This lead is used for power control when an external power amplifi er is
order to prevent noise from being generated.
connected. The power supply of a power amplifi er will be activated when
turning on the power of this unit.
(White) +
Front speaker lead
Left
(White/black stripe)
Dual CD changer control lead
-
(Brown/white stripe)
To front
FRONT SP
+
Note:
speaker
(Gray)
≥ Insulate this lead with vinyl tape when you do not connect it.
Right
-
(Gray/black stripe)
Antenna control lead
(to motor antenna) (max. 100 mA)
(Blue)
(Green) +
This lead is not intended for use with switch actuated power antenna.
Left
Rear speaker lead
(Green/black stripe)
Note:
-
To rear
REAR SP
≥ The power antenna extends automatically when the AM/FM radio mode is
+
speaker
selected.
(Violet)
Right
-
ACC power lead
ACC
(Violet/black stripe)
To ACC power, i12 V DC.
(Red)
Caution:
L
Battery lead
BATTERY 15 A
≥ Do not connect more than
To the car battery, continuous i12 V DC.
(Yellow)
one speaker to one set of
speaker leads.
R
Ground lead
To a clean, bare metallic part of the car chassis.
(Black)
70
CQ-C9800/9700U
CQ-C9800/9700U
71
...Otros modelos de este manual:
Unidad - CQC9800U (86.05 kb)