Iniciar sesión:
Votos - 2, Puntuación media: 3 ( )

Manual de usuario SkyLink, modelo MFV-310S

Fabricar: SkyLink
Tamaño del archivo: 46.91 kb
Nombre del archivo: 73067.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


PROGRAMMING YOUR NEW TRANSMITTER FOR STANLEY® OPENERS 4. BATTERY Thank you for your purchase of the Skylink® garage door remote control, Model MFV-310S. This remote is designed to work with Stanley® garage door opener with DIP switches. Please follow the details instructions below to setup the new transmitter to work with your existing opener. 1. Open the case with a coin. For code setting: Remove the battery cover on your Stanley® transmitter or the cover on receiver located on your garage door opener. Match the DIP switches on the Skylink® transmitter to already existing transmitter or receiver DIP switches. Button Dip Switch Examples of how to set Skylink Transmitter STANLEY 1050 -OPEN- SKYLINK Model MFV-310S -OPEN- —► I0IIIRIII0 1 23456789 10 123456789 10 12 volt alkaline battery (size 23A) included. 5. WARNING If this transmitter triggers other garage doors in your neighborhood, change all your transmitters and receiver to a new code setting. DO NOT let children use the garage door transmitter without adult supervision. Children can injure themselves or others by the garage door. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 3. Test the transmitter by pressing onto the button (see figure), the red LED should come on and it should activate the garage door. Close the case firmly. 2. TROUBLESHOOTING If the garage door cannot be activated, check the followings: - Ensure the DIP switch setting on the Skylink® is identical to the existing Stanley® remote. - Ensure all the DIP switches are pushed either all the way to the top, or bottom, not somewhere in the middle - The red light LED should come on when the button is pressed, if not, check the battery and its polarity, ensure it is inserted properly. 7. WARRANTY If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required. 8. CUSTOMER SERVICE Skylink will not be held liable or responsible for any misuse or application of this product other than for its intended use. If you would like to order Skylink's products or have difficulty getting them to work or download latest information and user manual, please : 1. visit our FAQ section at or 2. email us at support@skylinkhome.com, or 3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. Fax 1-800-286-1320 3. VISOR CLIP INSTALLATION CUSTOMER SERVICE 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Email: support@skylinkhome.com US Pat. 377458 P/N 101Z559 © 2008 SKYLINK GROUP ® are registered trademarks of their respective corporations...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría