Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Set this switch to the desired position while observing the sharpness of the picture. 123. Red and Blue Gain Controls (R GAIN/B GAIN) These controls are used to manually adjust the white balance. These controls only work when the White/Black Balance Selection Switch (126) is set to the MANU position. Turn the controls clockwise to increase the red and blue signal levels, and counterclockwise to decrease these levels. Note: As these controls employ Digital Processing, the Red and Blue signal levels will be changed in discrete steps. 124. Red and Blue Pedestal Level Controls (PED, R/B) The black balance can be set manually by these controls when the White/Black Balance Selection Switch (126) is set to the MANU position. Turn these controls clockwise to increase the red and blue pedestal levels, and counterclockwise to decrease the levels. Note: As these controls employ the Digital Processing, these levels will be changed in the steps. 125. Total Pedestal Level Control (TOTAL PEDESTAL) This control can adjust the pedestal level of the video signal (luminance) for matching the black level between two or more cameras in a system. Turn this control clockwise to increase the pedestal level, and counterclockwise to decrease the level. Note: As this control employs the Digital Processing, this level may be changed in the step. 126. White/Black Balance Selection Switch (AUTO/MANUpMAN/A/B) This switch is used to select the white balance and black balance modes as follows: MAN: The white balance and biack balance can be adjusted by the Red and Blue Gain Controls (123) and the Red and Blue Pedestal Level Controls (124). A: The White Balance can be set automatically by pressing the Auto White/Auto Black Set Switch (127) upwards, The setting is stored in memory A. B: Similar to A, but the setting is stored in memory B. Note: Two white balance setting, one each for different lighting conditions such as indoor and outdoor, may be stored in the two memories, A and B. 127. Auto White/Auto Black Set Switch (AWC/HOLD/ABC) This switch sets the white balance and black balance automatically as foHows: AWC: This position is used for setting the white balance when the White/Black Balance Selection Switch (126) is set to the A or B position of the White/Black Balance Selection Switch. White balance adjustment is required when "AWC A NG’ or 'AWC B NG" is displayed in the viewfinder or when the Auto Warning Indicator (129) on lights. HOLD: In this position, the white and black balances set at the AWC or ABC position can be held fixed, if so desired, for at least one year. ABC: This position is used for setting the black balance when the White/Black Balance Selection Switch (126) is set to the A or B position. Black balance adjustment is required when "ABC NG" is displayed in the viewfinder or when the Auto Warning Indicator (129) on the Remote Control Box (RCB) lights. Note: Since the black balance adjustment is always automatically performed the picture will flash in the viewfinder and on the monitor screen while the black balance is being set. This flashing indicates that the adjustment is currently being performed and will cease once the adjustment is completed, 128. Lens Iris Selection Switch (IRIS, MAN/AUTO) This switch is used to set the lens iris of the auto iris servo control zoom lens as follows. Auto: The iris level of the lens is controlled automatically. Note: Be sure to set the Iris Control Selection Switch on the zoom lens to the AUTO posiiton. MAN: The iris level of the lens is controlled to the desired level by using the Lens Iris Control (130). 129. Auto Warning Indicator (AUTO) This indicator blinks while the white balance or black balance is being automatically set. It goes out once the white and black balances have been correctly set. This indicator lights when the white or black balance is set improperly. In this case, carry out the automatic setting procedure for white and/or black balance. 130. Lens Iris Control (IRIS) The iris level of the zoom lens can be manually controlled by turning this control when the Lens Iris Selection Switch (128) is set to the MAN position. 131. Scene Selection Switch (SCENE) This switch is used to select the most suitable camera conditions, depending on scene conditions, to obtain the best picture possible, Refer to the Operating Instructions of the Color Camera WV-F700 or WV-F500 series. 132. Electronic Shutter Speed Selection Switch (OFF/100/250/500/1000/2000) This switch is operative only when a camera featuring the electronic shutter is connected with this control box. - 7 When fast-moving objects are shot at the slow shutter speeds typically found in conventional cameras they will appear blurred. The camera, however, features an electronic shutter function from which the following speeds can be selected: 1/100,1/250,1/500.1/1000 or 1/2000 of a second. As a result, blur-free recording of high-speed action, such as car racing, ...
Otros modelos de este manual:Control remoto - WVCB700A (564.55 kb)